Gunsmithing Inletting a magazine style bottom metal in a kimbe

[Oldcoast]

Is it possible to machine my stock to accept a magazine fed bottom metal?

I've got a kimber 84 montana in 270wsm with the composite stock. There isnt a floor plate on the composite model and it only holds 3 rounds. Kicking around the idea of having it mag fed.

Am I crazy or is there a stock manufacturer out there who makes a drop in application? This gun is too light so an aftermarket stock might ad some stability.

Thanks

 

[CDiPrecision]

Re: Inletting a magazine style bottom metal in a kimbe

I make DBM for this now..

 

[phideaux]

Re: Inletting a magazine style bottom metal in a kimbe

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CDiPrecision</div><div class="ubbcode-body">I make DBM for this now.. </div></div>


CDI is gtg. got one for a Rem 700 .308 about 2 weeks ago. you really should let him inlet your stock, I did my own and will send all my shops stocks and let Jeff do the inletting. it's not hard, but that damned dust goes everywhere. i start itching as soon as i walk in the shop. Thanks again for a great product CDI.
chuck
the gun shop
denison,tx