• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

It's gonna be a good day

wnroscoe

wnroscoe

Gunny Sergeant
Full Member
Minuteman
Jun 12, 2006
3,907
56
NW Louisiana
#1
Been slaving like a fool, gotta start the day off right though
wink.gif


2wd3hpt.jpg


Surgeon 591
AICS
260 Remington
Threaded 5/8x24 3A
KG Gun Kote CR Black
KMW Knob
jtnevt.jpg

2s7gfg4.jpg

289berd.jpg


Trued Remington 700
Tac Ops Knob
264 Win Mag
LAP Brake
Badger EFR
Surgeon LA 300WM DBM
Manner's in GAP Camo
FB Gun Kote

w71zbr.jpg

2a6p5y8.jpg

23ksmmw.jpg

rc0cig.jpg


LAP Receiver
Krieger @ 20" & Fluted
260 Remington
Badger M5 DBM
McMillan A5 in Desert, KMW Adj.Cheeck & Spacer system
Vias Brake with Thread Cap
KG Gun Kote in FDE

2em1w8l.jpg

2iardz6.jpg

 
#6
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tbag</div><div class="ubbcode-body">Wow, what a way to start the day. </div></div>

Yea, I also like the Green Monster drinks mixed 50/50 with Mountain Dew. Give it a try sometime
wink.gif
 
#7
Re: It's gonna be a good day

William,

I have a hard time believing you would have time to even go wrestle up a cougar from the Superior with what you have been up to. Way to jittery to carry on any kind of negotiations anyways...
wink.gif
 
#8
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HasgunWilltravel</div><div class="ubbcode-body">William,

I have a hard time believing you would have time to even go wrestle up a cougar from the Superior with what you have been up to. </div></div>

Like a comedian said one night, "what ever happened to the good ole days when all you needed for a date was a Van and a little Chloroform" You'd be surprised what the cat'd drag up
wink.gif


You'd think I'd be stuck to the ceiling after drinking that but hey, not even a buzz.
 
#10
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wnroscoe</div><div class="ubbcode-body">You'd think I'd be stuck to the ceiling after drinking that but hey, not even a buzz. </div></div>

You know, the first step is admitting you have a problem...
grin.gif


Beautiful work. I think that last one is my favorite of the bunch.
 
#13
Re: It's gonna be a good day

I bet whoever gets that 264 is planning on putting a whitetail on flat. That's going to be an awesome hunting rig. A 5-25 S&B and PVS 27 would really be the icing on the cake. Good work there Rosco.
 
#18
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RADcustom</div><div class="ubbcode-body">Looks like you need to water your yard.

That desert camo blends a little too well for around here.
wink.gif
</div></div>

Water bill last month was over $200.00.............I am watering the yard.
 
#19
Re: It's gonna be a good day

William,
Great looking rifles. I am saving pennies
smile.gif


Anyway, just a question, but what is the brown stuff on the threads on the 12th picture down? I know it isn't rust, but just curious what it was.

Thanks,
madd0c
 
#21
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: madd0c</div><div class="ubbcode-body">Anyway, just a question, but what is the brown stuff on the threads on the 12th picture down? </div></div>

Copper based anti-sieze
 
#22
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hill billy</div><div class="ubbcode-body">I like that KMW knob a lot. Ring wrench in the end of it? </div></div>

No wrench.
 
#24
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GunGuru727</div><div class="ubbcode-body">Nice looking rifles, what is the contour of the 20'' .260? (3rd rifle shown) </div></div>

#18 LV Krieger, that’s my default contour unless the client instructs differently.
 
#25
Re: It's gonna be a good day

I especially like the 3rd rifle down but I am exremely prejudiced because that's my new rifle from Roscoe. Thanks again Roscoe and I can't wait to get my hands on it.
 
#26
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SevenBat</div><div class="ubbcode-body">I bet whoever gets that 264 is planning on putting a whitetail on flat. That's going to be an awesome hunting rig. A 5-25 S&B and PVS 27 would really be the icing on the cake. Good work there Rosco.</div></div>

I'm guessin you'll be running some 130's real fast. Looks good.

Nice looking rifles all around Roscoe.
 
#27
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hill billy</div><div class="ubbcode-body">I like that KMW knob a lot. Ring wrench in the end of it? </div></div>

Like he said above, the end of the handle is NOT meant to be used as a socket.

The first Gen II handles would fit over the cross bolt nuts on most rings but that was just a design accident. I purposefully re-dimensioned the cuts so that it would not fit on all the newer handles, as I did not think there was any benefit of having that capability. Trade off is that somewhere, somehow, somebody is going to unscrew the bolt handle from the bolt body or over-torque the crossbolt upon tightening. There is at least one major brand of ring out there that is quick to snap the clamp plate if over tightened.

Good looking rifles William. Thanks for installing my handle.

Best,
TC
 
#31
Re: It's gonna be a good day

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JelloStorm</div><div class="ubbcode-body">How do you do such kick ass work when you have the shakes from all that sugary stuff?

5 hour energy are MUCH better than Monster / Redbull. I highly recommend it! </div></div>

No shakes but I'll try the 5 hour energy. Thanks.
 
You must log in or register to reply here.

Similar threads

ChiefSillyHorse
SOLD Performance Guns (Brad Stair) REM 700 .308 in AI 2.0 w/ accessories (WTT I need Glass)
Replies
10
Views
2K
256jsd
256jsd
D
Firearms Defiance, Rem 700, AR
Replies
26
Views
4K
deadly0311
D
DR0331
Firearms SOLD Baldwin Gun Works .308
Replies
23
Views
2K
DR0331
DR0331
NukeMMC
Firearms WTS - Wells Custom R700 package in 260
Replies
39
Views
4K
NukeMMC
NukeMMC
corey4
rifle weight; heavier vs lighter
Replies
2
Views
8K
acudaowner
acudaowner
Top Bottom
Back
Home
Forums
Merch
Alerts