Yes there is probably another one of these threads on here somewhere. i couldn't find it. So lets see em old, new, custom, stock, factory custom, compact, full size.
POST EM UP!
POST EM UP!
Suppressors Lets see those 1911's!!!!
- Thread starter Bruiser_Joe
- Start date
Re: Lets see those 1911's!!!!
yeah its ok, lol
yeah its ok, lol
Re: Lets see those 1911's!!!!
RIA "Tacticool"...bone stock other than a .03 cent front sight Testors paint job...sort of the polar opposite of that sweet 2011...
RIA "Tacticool"...bone stock other than a .03 cent front sight Testors paint job...sort of the polar opposite of that sweet 2011...
Re: Lets see those 1911's!!!!
she aint much to look at, but she keeps me warm at night. TLE/RL
and my first 1911, the hardballer
she aint much to look at, but she keeps me warm at night. TLE/RL
and my first 1911, the hardballer
Re: Lets see those 1911's!!!!
DW Stainless Valor. With all the rifle shooting, I sometimes forget she is in the safe.
DW Stainless Valor. With all the rifle shooting, I sometimes forget she is in the safe.
Re: Lets see those 1911's!!!!
My 1945 1911 Remington
[img:center]
[/img]
[img:center]
[/img]
What is a 1911 without a good knife?
[img:center]
[/img]
and another Remington
[img:center]
[/img]
My 1945 1911 Remington
[img:center]
[img:center]
What is a 1911 without a good knife?
[img:center]
and another Remington
[img:center]
Re: Lets see those 1911's!!!!
my daily carry
and my dream built by Ken Crawley
my daily carry
and my dream built by Ken Crawley
Re: Lets see those 1911's!!!!
Re: Lets see those 1911's!!!!
I love those old military issues. Nice!
I love those old military issues. Nice!
Re: Lets see those 1911's!!!!
Re: Lets see those 1911's!!!!
Baer TRS with Larry Davidson Warthog grips. Since this picture was taken the rear sight has been changed to a 10-8. This gun is used for IDPA and occasional carry.
Delta Elite built by Bruce Gray. This is going back in a month or so for a few more things.
-10-8 long, curved trigger
-Bar-Sto Match Target 10mm barrel, flush cut and crown 11*
-stainless, blank EGW Heavy Duty slide stop, hand checkered top and bottom 30 LPI to match frontstrap
-stainless, blank, Chen MaxBevel flat mainspring housing, hand checkered 30 LPI to match frontstrap
This gun also now has a set of LD's grips, but my pictures don't look anywhere near as nice as the one above.
Baer TRS with Larry Davidson Warthog grips. Since this picture was taken the rear sight has been changed to a 10-8. This gun is used for IDPA and occasional carry.
Delta Elite built by Bruce Gray. This is going back in a month or so for a few more things.
-10-8 long, curved trigger
-Bar-Sto Match Target 10mm barrel, flush cut and crown 11*
-stainless, blank EGW Heavy Duty slide stop, hand checkered top and bottom 30 LPI to match frontstrap
-stainless, blank, Chen MaxBevel flat mainspring housing, hand checkered 30 LPI to match frontstrap
This gun also now has a set of LD's grips, but my pictures don't look anywhere near as nice as the one above.
Re: Lets see those 1911's!!!!
Wilson KZ-45
on the lower end of the scale as far as Wilsons go , but still shoots bugholes
Wilson KZ-45
on the lower end of the scale as far as Wilsons go , but still shoots bugholes
Re: Lets see those 1911's!!!!
Will this work?
or this?
Will this work?
or this?
Re: Lets see those 1911's!!!!
John Hobbs full house on series 70
John Hobbs full house on series 70
Re: Lets see those 1911's!!!!
Springfield Armory's
Silver one is a 1911A1 Loaded - I've Changed the rear sights to Novak and the grips are now by Larry Davidson. Springfield Armory Custom Shop replaced the barrel with a fitted Nowlin match barrel, carry bevel, and checkered the front strap 25lpi. I'll try and get one with the current configuration.
Black one is a Springfield mil-spec Champion. A beaver tail and commander hammer was added after I got bit by the spur hammer.
Springfield Armory's
Silver one is a 1911A1 Loaded - I've Changed the rear sights to Novak and the grips are now by Larry Davidson. Springfield Armory Custom Shop replaced the barrel with a fitted Nowlin match barrel, carry bevel, and checkered the front strap 25lpi. I'll try and get one with the current configuration.
Black one is a Springfield mil-spec Champion. A beaver tail and commander hammer was added after I got bit by the spur hammer.
Re: Lets see those 1911's!!!!
Older pic, the STI had a red grip I kryloned. The paint started to wear through giving it a kinda cool two tone effect.
...couldn't get used to it so I swapped for a black grip.
Older pic, the STI had a red grip I kryloned. The paint started to wear through giving it a kinda cool two tone effect.
...couldn't get used to it so I swapped for a black grip.
Re: Lets see those 1911's!!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">*cough* How about a 2011...
</div></div>
Oh man now I want want of these..
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Poison123</div><div class="ubbcode-body">*cough* How about a 2011...
Oh man now I want want of these..
Re: Lets see those 1911's!!!!
<span style="font-weight: bold"> </span> <span style="color: #000099"> </span> here you go,plain Jane w/ older AWC Nexus
<span style="font-weight: bold"> </span> <span style="color: #000099"> </span> here you go,plain Jane w/ older AWC Nexus
Re: Lets see those 1911's!!!!
Wheres yours Joe?
Wheres yours Joe?
Re: Lets see those 1911's!!!!
Here's mine: Springfield Armory Loaded Parkerized. Still stock. Shoots low, so may be sending it back for a sight adjustment and possibly a trigger job as it is a bit gritty still.
Here's mine: Springfield Armory Loaded Parkerized. Still stock. Shoots low, so may be sending it back for a sight adjustment and possibly a trigger job as it is a bit gritty still.
Re: Lets see those 1911's!!!!
Mars Axiom
Mars Axiom
Re: Lets see those 1911's!!!!
Re: Lets see those 1911's!!!!
A few of mine. That is a Springfield on the left. It has been worked over pretty well from its original configuration. In the middle is a Kimber Custom II that has also been worked over. Most of the internals are Ed Brown parts. The barrel is a Jarvis. And on the right is a stock Ed Brown Special Forces.
A few of mine. That is a Springfield on the left. It has been worked over pretty well from its original configuration. In the middle is a Kimber Custom II that has also been worked over. Most of the internals are Ed Brown parts. The barrel is a Jarvis. And on the right is a stock Ed Brown Special Forces.
Re: Lets see those 1911's!!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 3PER</div><div class="ubbcode-body">Ed Brown Kobra Carry.
</div></div>
Perfection...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 3PER</div><div class="ubbcode-body">Ed Brown Kobra Carry.
Perfection...
Re: Lets see those 1911's!!!!
Correct me if I'm wrong but I believe today is the 100th anniversary of the 1911 pistol.... well today is also my birthday so I think I would be a borderline communist if I didn't go make a purchase. What do you think?
Correct me if I'm wrong but I believe today is the 100th anniversary of the 1911 pistol.... well today is also my birthday so I think I would be a borderline communist if I didn't go make a purchase. What do you think?
Re: Lets see those 1911's!!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rgrmike</div><div class="ubbcode-body">Correct me if I'm wrong but I believe today is the 100th anniversary of the 1911 pistol.... well today is also my birthday so I think I would be a borderline communist if I didn't go make a purchase. What do you think? </div></div>
Since its the 100th and your birthday you have permission to get TWO.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rgrmike</div><div class="ubbcode-body">Correct me if I'm wrong but I believe today is the 100th anniversary of the 1911 pistol.... well today is also my birthday so I think I would be a borderline communist if I didn't go make a purchase. What do you think? </div></div>
Since its the 100th and your birthday you have permission to get TWO.
Re: Lets see those 1911's!!!!
Just got it today. Did some break-in. Shot 150 Rounds of 230Gr FMJ's and finished the day with those 7 rounds of 230Gr Golden Sabers. Had to function check the HP's to make sure they'd feed OK. I did pretty good for my first hand gun I think.
Just got it today. Did some break-in. Shot 150 Rounds of 230Gr FMJ's and finished the day with those 7 rounds of 230Gr Golden Sabers. Had to function check the HP's to make sure they'd feed OK. I did pretty good for my first hand gun I think.
Re: Lets see those 1911's!!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kraigWY</div><div class="ubbcode-body">
</div></div>
Union switch & signal...damn that is nice.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kraigWY</div><div class="ubbcode-body">
Union switch & signal...damn that is nice.
Re: Lets see those 1911's!!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roby</div><div class="ubbcode-body">heres a couple. there are some more i dont have any pics of
kimber gold medal
delta elite by miller
9mm by local
colt commander by local
emp
</div></div>
Love the EMP...looks almost like mine.
I'll post some pics of my 1911s/2011 here soon.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roby</div><div class="ubbcode-body">heres a couple. there are some more i dont have any pics of
kimber gold medal
delta elite by miller
9mm by local
colt commander by local
emp
</div></div>
Love the EMP...looks almost like mine.
I'll post some pics of my 1911s/2011 here soon.
Re: Lets see those 1911's!!!!
here is one i'm buying TG for a future build
my kimber TLE/RL is off at mars armament at the moment.
here is one i'm buying TG for a future build
my kimber TLE/RL is off at mars armament at the moment.
Re: Lets see those 1911's!!!!
oh you bastard...
oh you bastard...
Re: Lets see those 1911's!!!!
This is my Kimber that I bought of a member here on the Hide a few years ago.
Kimber 1911, Stainless II
This is my Kimber that I bought of a member here on the Hide a few years ago.
Kimber 1911, Stainless II
Re: Lets see those 1911's!!!!
My Baby
My Baby
Re: Lets see those 1911's!!!!
Re: Lets see those 1911's!!!!
Re: Lets see those 1911's!!!!
that just makes me cry a little bit, beautiful thing. very nice collection
that just makes me cry a little bit, beautiful thing. very nice collection
Re: Lets see those 1911's!!!!
1911's are teh yummy.
New Series 70 Colt built by Yost-Bonitz (1* Elite package). This one just plain runs.
60's vintage Colt 38 Super built by CT Brian. This is probably the closest I will ever get to a full boat custom. After some shakedown rounds put through it, I took it to a Pat Rogers carbine class as my transition weapon. It has accurails and every time I went to press check it, I would eject a round because the railed action was so slick. It was pretty funny. Also, Tim milled the curve of the slide a bit to get rid of pitting, so it was a little loose in holster. During the MEUSOC/Navy drills, it came flying out of the holster and surfing across three days of carbine class brass...needless to say, it is not a safe queen, but I would have liked to have kept it pristine for at least 6 months, not 2 weeks.
Current primary carry piece - Kimber Royal Carry. Box stock besides grips. Runs great. Going to get an overhaul soon now that my Colt Commander is ready to carry.
60's Vintage Colt Lightweight Commander. The patina on this one is great and I didn't want a full custom job to retain it coolness. I did have some tall Yost retro sights put on as well as an ambi safety (lefty), trigger job, fresh springs and any internal parts replaced that needed it. This pic is pre-mods...I will see the upgrades when I am home on my next leave. This one will get full time carry status while the Kimber gets some custom work done.
Also have a stainless new Series 70 that will get turned into a suppressor host.
I am on the hunt for a vintage 38 Super Lightweight Commander.
1911's are teh yummy.
New Series 70 Colt built by Yost-Bonitz (1* Elite package). This one just plain runs.
60's vintage Colt 38 Super built by CT Brian. This is probably the closest I will ever get to a full boat custom. After some shakedown rounds put through it, I took it to a Pat Rogers carbine class as my transition weapon. It has accurails and every time I went to press check it, I would eject a round because the railed action was so slick. It was pretty funny. Also, Tim milled the curve of the slide a bit to get rid of pitting, so it was a little loose in holster. During the MEUSOC/Navy drills, it came flying out of the holster and surfing across three days of carbine class brass...needless to say, it is not a safe queen, but I would have liked to have kept it pristine for at least 6 months, not 2 weeks.
Current primary carry piece - Kimber Royal Carry. Box stock besides grips. Runs great. Going to get an overhaul soon now that my Colt Commander is ready to carry.
60's Vintage Colt Lightweight Commander. The patina on this one is great and I didn't want a full custom job to retain it coolness. I did have some tall Yost retro sights put on as well as an ambi safety (lefty), trigger job, fresh springs and any internal parts replaced that needed it. This pic is pre-mods...I will see the upgrades when I am home on my next leave. This one will get full time carry status while the Kimber gets some custom work done.
Also have a stainless new Series 70 that will get turned into a suppressor host.
I am on the hunt for a vintage 38 Super Lightweight Commander.
Re: Lets see those 1911's!!!!
some of my favorites (NOT MINE)
CHUCK ROGERS
SPRINGFIELD CUSTOM SHOP
MARS ARMAMENT
some of my favorites (NOT MINE)
CHUCK ROGERS
SPRINGFIELD CUSTOM SHOP
MARS ARMAMENT
Re: Lets see those 1911's!!!!
not too shabby.....
not too shabby.....
Re: Lets see those 1911's!!!!
Kimber Pro II
Series 70
Caspian 38 Super
STI 38 Super
Para 45 w Caspian Slide
Kimber Pro II
Series 70
Caspian 38 Super
STI 38 Super
Para 45 w Caspian Slide
