Magnetospeed mount

[sprad05]

Has anyone tried their hand at making a mount, I was thinking about getting my first 3d printer and possibly giving it a try.

 

[supraguy88t]

I made one out of 1" carbon tube and a scope mount and it work great.

 

[sprad05]

Not a bad idea, I think im getting a 3d printer and going to give it a shot

 

[Holliday]

I made one out of 1" carbon tube and a scope mount and it work great.

We need pics......

 

[sprad05]

We need pics......

Dat would be nice

 

[supraguy88t]

 

[Holliday]

View attachment 7487978View attachment 7487979

Very nice!

 

[IPoutdoors]

View attachment 7487978View attachment 7487979

Shuttup and take my money!

 

[sprad05]

Thats awesome! Gotta get a carbon tube!

 

[supraguy88t]

Could have gone a little cheaper on the scope mount but the 1” tubes on Amazon are relatively cheap and can be cut to length easily. The bracket at the end holding the magnetospeed is a remote control drone motor mount. That is also what the carbon tubes are technically for.

 

[Holliday]

Could have gone a little cheaper on the scope mount but the 1” tubes on Amazon are relatively cheap and can be cut to length easily. The bracket at the end holding the magnetospeed is a remote control drone motor mount. That is also what the carbon tubes are technically for.

My issue is that I have a long reach with a rem 700 and a 9 “ can. The light weight carbon fiber might be the ticket......

 

[supraguy88t]

My issue is that I have a long reach with a rem 700 and a 9 “ can. The light weight carbon fiber might be the ticket......

https://www.amazon.com/Carbon-Fiber-Tube-Wrapped-Surface/dp/B07F63N97P/ref=sr_1_9?dchild=1&keywords=carbon+fiber+1%22&qid=1607177113&s=dmusic&sr=1-9-catcorr

here is a 40" long tube. they are very rigid so you might be able to make it work

 

[Holliday]

https://www.amazon.com/Carbon-Fiber-Tube-Wrapped-Surface/dp/B07F63N97P/ref=sr_1_9?dchild=1&keywords=carbon+fiber+1%22&qid=1607177113&s=dmusic&sr=1-9-catcorr

here is a 40" long tube. they are very rigid so you might be able to make it work

Thanks! Yea the question is will it be rigid enough to keep it from bouncing around? I’ll have to give it a try.

 

[Barryd]

Very nice DIY mount!

 

[Holliday]

Could have gone a little cheaper on the scope mount but the 1” tubes on Amazon are relatively cheap and can be cut to length easily. The bracket at the end holding the magnetospeed is a remote control drone motor mount. That is also what the carbon tubes are technically for.

Do you have a link to that drone mount?

 

[Jakerz]

That's awesome! I had that exact same idea, but didn't think about the motor mount for the drone on the end, I was wondering how to attach the MagnetoSpeed to it. I've got a super cheapo mount I got from Wal-Mart for an AR years ago I was planning on using.

Jake

 

[supraguy88t]

Do you have a link to that drone mount?

unfortunately the one I used is not currently available but I'm sure there are other options like it

https://www.amazon.com/Inspired-Flight-Universal-Motor-Mount/dp/B0797BSQN9/ref=pd_ybh_a_10?_encoding=UTF8&psc=1&refRID=VDQAAZ044VWVJC2EDZR2