Re: MDT chassis system
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mikeb11</div><div class="ubbcode-body">i just bought this MDT chassis and was wondering if anyone has used one or knows anything about them.. any input would be awesome. </div></div>
mikeb11,
you need to choose the correct trigger.
P.S.
I found that
problem in setting the trigger - 100% related to the safety lever Jewell Trigger Number JT-01 Model HVRTSBR-A.
The problem is this, - the X-Mark Pro Trigger safety lever slightly larger (longer) and the lever itself is rejected by 15% -20% degrees to the right of the main stem lever safety.
When you need to set the security on the F / S perform silent dilatory motion lever arm over and working at 100%, or triggers, which are based on a 100% identification of the levers of Remington (X-Mark Pro Trigger),-such as Hubert Trigger should work, given that it is necessary to make this manipulation with the lever trigger, that is a bit ottyagivatot itself when the system is F / S. Do triggers that have short arms and no security characteristic features Remington trigger (lever declined by 15% -20% of degrees in law from the main stem lever safety) like Timney, Jewel, CG X-Treme Mod 22 trigger-task complicated by the ability to produce this manipulation, arm-in these triggers, just straight and the load lever is a little different from the load produced by the lever safety X-Mark Pro Trigger.