Rifle Scopes MIL to inch Conversion sheet for sight in...

[Ring]

i just made this up, good for fine tuning your scope during sight in,,

need to move group X inchs to zero?..



or print/save it from here, its formatted to fit on a index card..

https://docs.google.com/spreadsheet/ccc?key=0AtBsvElLB2ajdFFWMGViUTlVSHlhLWFPdWYyN182LWc#gid=0

 

[Rob01]

Re: MIL to inch Conversion sheet for sight in...

Or you could just look through the scope at the reticle and adjust off that.

 

[tylerw02]

Re: MIL to inch Conversion sheet for sight in...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rob01</div><div class="ubbcode-body">Or you could just look through the scope at the reticle and adjust off that. </div></div>

^this

I don't get why so many people complicate this stuff.

 

[Ring]

Re: MIL to inch Conversion sheet for sight in...

not if you cant see your hits on paper... that y i like MOA, math is easy in my head for making adjustments when i look at a paper..

if im shooing paper at 300 500,so on, and need to tune in a few clicks to get it dead on to put it in a log book, this lets me do that.

 

[LoneWolfUSMC]

Re: MIL to inch Conversion sheet for sight in...

I just run the reticle.

I have yet to see a situation where "fine tuning" more than what I can see through the scope is necessary.

Good work on the table though. Someone may find it useful.

 

[19Scout77]

Re: MIL to inch Conversion sheet for sight in...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ring</div><div class="ubbcode-body">not if you cant see your hits on paper... that y i like MOA, math is easy in my head for making adjustments when i look at a paper..

if im shooing paper at 300 500,so on, and need to tune in a few clicks to get it dead on to put it in a log book, this lets me do that. </div></div>

Are you using a target camera set up of some sort?