More NEW from Berger - for ELR

[ELR researcher]

From Peterson's SHOT digital press release (new casings since SHOT 2018) - including:

• .338 EnABELR
• .375 EnABELR

From Peterson re the EnABELR casings, "the EnABELRs are a case that we worked really close with Bryan Litz on. He will be making an announcement at Shot Show about them."

Speculation (mine) - a new 375 chambering to go with their new solids. The 338...possibly an "answer/alternative" to the 33 XC.

BTW, since, per Peterson, the 33 XC casings are only currently available direct from Tubb, might be the same with the EnABELRs (direct from Berger).

 

[badassgunworks]

From Peterson's SHOT digital press release (new casings since SHOT 2018) - including:

• .338 EnABELR
• .375 EnABELR

From Peterson re the EnABELR casings, "the EnABELRs are a case that we worked really close with Bryan Litz on. He will be making an announcement at Shot Show about them."

Speculation (mine) - a new 375 chambering to go with their new solids. The 338...possibly an "answer/alternative" to the 33 XC.

BTW, since, per Peterson, the 33 XC casings are only currently available direct from Tubb, might be the same with the EnABELRs (direct from Berger).

well the xc head stamped brass may only be available from tubb by Peterson the 338 lapua cylinder long un formed anyone can purchase

 

[wildcats]

Are this new cases going to be based on .590 or .637 bolt face?

 

[SIDS01]

well the xc head stamped brass may only be available from tubb by Peterson the 338 lapua cylinder long un formed anyone can purchase

What are the lead times and minimum quantities for these?

 

[badassgunworks]

What are the lead times and minimum quantities for these?

call Peterson and order them or contact dave kiff at ptg we were working on a deal with getting any cylinder case you want from Peterson. you can also order cylinder lapua from adg

 

[badassgunworks]

Are this new cases going to be based on .590 or .637 bolt face?

good question???? my guess .637 but its just a guess....

 

[wildcats]

good question???? my guess .637 but its just a guess....

If i had to guess ,it will be a long cylinder based on the 375 cheytac case.

 

[badassgunworks]

If i had to guess ,it will be a long cylinder based on the 375 cheytac case.

no its not a long cylinder cheytac its shorter and fatter from the photos I have seen. but who knows I don't really care. not relevant

 

[wildcats]

no its not a long cylinder cheytac its shorter and fatter from the photos I have seen. but who knows I don't really care. not relevant

LOL...I have to agree with you on that one.
Everybody is trying to re-invent the wheel...but it still round.

 

[badassgunworks]

LOL...I have to agree with you on that one.
Everybody is trying to re-invent the wheel...but it still round.

round wheel yes but is it steel or wood or alum and is the tire on that wheel rubber or synthetic bias ply or steel belted

 

[wildcats]

round wheel yes but is it steel or wood or alum and is the tire on that wheel rubber or synthetic bias ply or steel belted

 

[THEIS]

round wheel yes but is it steel or wood or alum and is the tire on that wheel rubber or synthetic bias ply or steel belted

Hi,

I prefer my wheels to be shape shifting because a circle can only adapt to certain things

Sincerely,
Theis

 

[wildcats]

Hi,

I prefer my wheels to be shape shifting because a circle can only adapt to certain things
View attachment 7000892

Sincerely,
Theis

great for the Lunar Rover

 

[Raufoss]

It will be a 375 cheytac type performance but that can be mag feed.

Just like 338 LM vs 338 NM.

Would be the most logical so it fit their M30 TS system.

 

[badassgunworks]

It will be a 375 cheytac type performance but that can be mag feed.

Just like 338 LM vs 338 NM.

Would be the most logical so it fit their M30 TS system.

correct

 

[ELR researcher]

If i had to guess ,it will be a long cylinder based on the 375 cheytac case.

I doubt that since Peterson already has a straight cylinder line called Wildcat Tubes (https://www.petersoncartridge.com/products/wildcat-tubes) - CT class are planned but not (currently) expected - per Peterson, "We will also be offering the Tubes in the CheyTac and Lapua sizes. We are looking at sometime later this year before that will happen though."

 

[badassgunworks]

I doubt that since Peterson already has a straight cylinder line called Wildcat Tubes (https://www.petersoncartridge.com/products/wildcat-tubes) - CT class are planned but not (currently) expected - per Peterson, "We will also be offering the Tubes in the CheyTac and Lapua sizes. We are looking at sometime later this year before that will happen though."

they are called cylinder brass brass before its formed and trimmed

 

[ELR researcher]

they are called cylinder brass brass before its formed and trimmed

They are called "Wildcat Tubes", Peterson's name - give them a bit of a break here.