Rifle Scopes Mount/rings suggestions for Rem 700?
- Thread starter dbsinh2o
- Start date
Re: Mount/rings suggestions for Rem 700?
I have a similar build and use 30mm A.R.M.S. #22 medium height rings on a 50 mm objective size scope. The bases were not necessary - my action is a Surgeon with an integral picatinny rail. I'm sure any reputable scope base brand would do - LaRue, Badger, Nightforce, etc.
Jason
I have a similar build and use 30mm A.R.M.S. #22 medium height rings on a 50 mm objective size scope. The bases were not necessary - my action is a Surgeon with an integral picatinny rail. I'm sure any reputable scope base brand would do - LaRue, Badger, Nightforce, etc.
Jason
Re: Mount/rings suggestions for Rem 700?
Dude the search function is your friend. This topic has been hammered flat, that being said, you cant go wrong with Badger Ordnance, Seekins, Near, or Nightforce. They all make amazing, top notch products, it just depends on your budget and intended use.
Dude the search function is your friend. This topic has been hammered flat, that being said, you cant go wrong with Badger Ordnance, Seekins, Near, or Nightforce. They all make amazing, top notch products, it just depends on your budget and intended use.
Re: Mount/rings suggestions for Rem 700?
I agree ... but there are always new products ...
Use this search engine -- I hate google ... but it does work well...http://www.google.com/cse/home?cx=010955838166721108978:qcbx5qqy10o&hl=en
for the rings-- take a look at these
http://www.tacticalrifles.net/defaultrings.asp
I agree ... but there are always new products ...
Use this search engine -- I hate google ... but it does work well...http://www.google.com/cse/home?cx=010955838166721108978:qcbx5qqy10o&hl=en
for the rings-- take a look at these
http://www.tacticalrifles.net/defaultrings.asp
Re: Mount/rings suggestions for Rem 700?
Didn't ask because I'm too lazy to search. Been reading for a couple of days now. Just wondering what folks with some experience with Rem 700s would suggest on a similar setup.
I don't want to end up buying components that don't fit together properly. Been there. Nothing like having to mill down the clamps on a set of new Mark 4 rings, because they're so long they bottom out on your mount.
Didn't ask because I'm too lazy to search. Been reading for a couple of days now. Just wondering what folks with some experience with Rem 700s would suggest on a similar setup.
I don't want to end up buying components that don't fit together properly. Been there. Nothing like having to mill down the clamps on a set of new Mark 4 rings, because they're so long they bottom out on your mount.
Re: Mount/rings suggestions for Rem 700?
In that case man, just get a set of Badger Ordnance 20 moa steel base and rings and call it a day, there expensive, but they are also practically flawless, and it sounds like you have already learned the "cry once, buy once" lesson first hand.
In that case man, just get a set of Badger Ordnance 20 moa steel base and rings and call it a day, there expensive, but they are also practically flawless, and it sounds like you have already learned the "cry once, buy once" lesson first hand.
Similar threads
