Mounting a scout scope to winchester 9422?
- Thread starter johnl
- Start date
There should be a dovetail groove along the top side edge that accepts rimfire style rings. At least my rifle circa mid 80's does.
Assuming that is long eye relief scope you could mount something like this:
BKL-554 - Dovetail to Weaver Adaptor Mounts - BKLTech.com
extended part facing forward maybe would work. If you have the capability you could buy a longer rail and make your own.
94/22 should have a dovetail grove reciever
BKL-554 - Dovetail to Weaver Adaptor Mounts - BKLTech.com
extended part facing forward maybe would work. If you have the capability you could buy a longer rail and make your own.
94/22 should have a dovetail grove reciever
The 9422 should have 3/8 dovetail for the Tip-Off Mount. Weaver Quad Lock .22 1" Rings
What a great rifle, I shot the crap out of mine as a kid. Need to take it out now.
What a great rifle, I shot the crap out of mine as a kid. Need to take it out now.
Here are the goodies. Need a dovetail to weaver with a long rail to mount scope forward of the action. Or say fuck it, sell the scope and put a weaver K2.5 with regular rimfire rings on the receiver. Kinda want to go with option A.
I have a model 94 that I inherited from my Dad. It has a Burris EER scope mounted on it. When I get home tonight, I will pull it out and see how it was done.
OK, here are a couple of crappy cell phone pictures. This is a XS Scout Scope mount. I have included the link below. It looks like the only requirement is a dove tail sight 4 inches in front of the receiver, I believe your 9422 has that dovetail for the rear sight. On my rifle there is a large screw underneath the scope. This is where it attaches to the dove tail.
http://xssights.com/index.php?nID=scopemounts&cID=Scope Mounts&pID=scopemounts
I think I might replace the rings with some Warne quick detach rings for mine. If you don't have a screwdriver in your pocket, the ghost ring sight is useless.
Hope this helps.
OK, here are a couple of crappy cell phone pictures. This is a XS Scout Scope mount. I have included the link below. It looks like the only requirement is a dove tail sight 4 inches in front of the receiver, I believe your 9422 has that dovetail for the rear sight. On my rifle there is a large screw underneath the scope. This is where it attaches to the dove tail.
http://xssights.com/index.php?nID=scopemounts&cID=Scope Mounts&pID=scopemounts
I think I might replace the rings with some Warne quick detach rings for mine. If you don't have a screwdriver in your pocket, the ghost ring sight is useless.
Hope this helps.
Last edited:
BTT since adding the link and crummy cell phone pictures.
OP let me know if you have any questions specific to the XS mount.
OP let me know if you have any questions specific to the XS mount.
Similar threads
