My Custom R25

InkedIan

Banhammer
Banned !
Full Member
Minuteman
Sep 6, 2007
570
19
Va
20121022_185609.jpg20121014_155731.jpg20121022_185653.jpg
Remington R25
Fulton Armory .308/7.62 Medium weight 18.5" 1/10"twist SS Barrel
JP Enterprises adjustable gas block
CMC Trigger
Tactical Ergo grip
Omega 30 Suppressor
34mm 20moa ADM Recon Mount
Bushnell 3.5-21x50mm G2DMR Reticle


Federal Gold Medal 168gr smk 10 shot group at a 100yds on the left of the target(center group was a different rifle).

I shot a match on the 27th using 178gr HPBT Hornady Superformance ammo and the rifle did really good. Me on the other hand did ok at best. I hit 12 out of 20 targets and my longest hit was 969yds and the farthest target was 1070(+ or -)yds. This was my first match and I caught myself making mistakes like not watching my bubble level, bad shooting positions, and not making wind calls. The rifle had no problems other than some blow back from the suppressor making the ammo dirty which didn't effect anything really. 1st stage I hit 2 of 5 targets, 2nd stage I hit 2 of 5, 3rd stage I hit 4 of 5, 4th stage i hit 4 of 5. As you can tell once I started to settle down I made more hits.

Also, after 100 rounds of ammo and about 3 bore snake pulls in between I did a good cleaning with some montana extreme and got NO signs of copper and was clean after 5 patches which says a lot about the barrel to me. Very happy with the Fulton Armory barrel.
 
Last edited:
Re: My Custom R25

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bennybone</div><div class="ubbcode-body">I just ordered me a FA barrel in 6.5 CM. Cant wait to get it. </div></div>

I'm definitely happy with mine! A 10 shot group ctc that is .5" vertical and .7" horizontal with factory ammo is pretty good. The fact that it pretty much doesn't copper foul is a big plus!