NEED HELP: Base For Winchester

[Mattrmvpd]

Guys I am having a HELL of a time getting a REAR base to match up.

Rifle:

5 digit Winchester M70 (LONG ACTION) .308.... EARLY 40's production Target

I have tried base: Burris 2 piece # 410605 - BUT the holes are TOO close together.


I have measure the REAR holes for the REAR piece base and NEED one with a hole spacing of:

.225 - Center to Center as close as I could get

The Burris was approximately .125


ANYONE have one or know how to get one would be greatly appreciated. This has to be a 2 piece setup as this rifle has olympic sights from factory...

Thanks
Matt (LEO SOUTH GA)

 

[fdkay]

Re: NEED HELP: Base For Winchester

Call EGW. Tell them what you have and what you need.
They may make a custom for you. Don't know if they'll do a two piece

 

[Mattrmvpd]

Re: NEED HELP: Base For Winchester

I checked... seems like they ONLY do one piece bases...

Matt.

 

[turbo54]

Re: NEED HELP: Base For Winchester

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mm128</div><div class="ubbcode-body">I checked... seems like they ONLY do one piece bases...

Matt. </div></div>

Why not cut the center out of it?

 

[Mattrmvpd]

Re: NEED HELP: Base For Winchester

Turbo,

I have thought of that and may just do it in the end. Bad thing is i have already ordered 2 different 2 piece sets and the fronts are good just really need the single rear.