Suppressors Need help with BoMar Sight

libertyman777

Are you gonna eat that....
Full Member
Minuteman
Nov 26, 2007
849
11
54
Heflin, Alabama
I've got a BoMar BMCS sight that I received as part of an estate. Does anyone out there know what the mounting screw looks like? I might have it in some of the stuff but have no idea what it may look like. Here's the sight>

032.jpg


001.jpg



Thanks,

Paul
 

yotefever

Sergeant
Full Member
Minuteman
Jun 26, 2009
122
0
wi
Re: Need help with BoMar Sight

I checked mine and it is a 6x48 and 3/8" long, thumb screw with 'indents' around the outside for good repeatable click adj. for elevation. There is also a slot for a flat screw driver.
Mine sites are flat based for my Contenders and XP-100's and use a 6x48 screws for mounting too. Not sure if that is what yours would be but the elevation screw should be the same.
The company (Bo Mar)closed it's doors but there is another one making a similar site but not sure if the screws are the same.
If you let me know where you live I'm sure there is a handgun silhouette shooter in your area that has one that I could get in touch with you.

If you need a pic I could get one tomorrow, I can't get pics onto my putor at home.
 

yotefever

Sergeant
Full Member
Minuteman
Jun 26, 2009
122
0
wi
Re: Need help with BoMar Sight

Not the best pic but here is another similar site.
Here is the site for the site.
grin.gif
 

kz45

Sergeant
Full Member
Minuteman
Nov 28, 2009
116
0
54
Denham Springs La
Re: Need help with BoMar Sight

There should be a set screw under the pivot arm that the thumb screw screws into
smile.gif
 

libertyman777

Are you gonna eat that....
Full Member
Minuteman
Nov 26, 2007
849
11
54
Heflin, Alabama
Re: Need help with BoMar Sight

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1kz45</div><div class="ubbcode-body">There should be a set screw under the pivot arm that the thumb screw screws into
smile.gif
</div></div>

You gots a picher?
 

yotefever

Sergeant
Full Member
Minuteman
Jun 26, 2009
122
0
wi
Re: Need help with BoMar Sight

Libertyman,
Has the US humane society approved of you dog pic?
grin.gif

We have been getting hit hard with their commercials lately
mad.gif


If you need more help I might be able to find a handgun silhouette shooter in your area that more than likely will have a BOMAR on a gun that you could look at?
 

kz45

Sergeant
Full Member
Minuteman
Nov 28, 2009
116
0
54
Denham Springs La
Re: Need help with BoMar Sight

When you slide it into the dove tail, flip up the sight and to the left, from the back, should be a spot for a set screw that uses a allen, use lock tight(blue) and tighten down, then fold down and install the adjustment screw, don't forget the little spring, sight in at distance, then shoot the snot out of it
smile.gif