Rifle Scopes Need new rings, any assistance is appreciated!

[6xcKY]

To make a long story short, I used the WRONG kind of paint remover on some aluminum rings I had and they pretty much melted. The end...

Now, my rifle is in the final process of being built and I need to get my glass back in working condition but I am not sure what size to get.

I got a new Krieger MTU barrel installed, so the contour is no longer the same. I run a 20moa rail also.

What ring height should I use with this set up? Bushnell Elite 4200 (30mm) with 44mm objective, Butler Creek caps, 20moa rail, MTU contour.

 

[Magnumdood]

Call Richard Near at Near Mfg. Near Manufacturing - Rifle Scope Bases He makes the best rails and mounts available, and he is very knowledgeable regarding what you'll need based on your action, barrel and scope. He isn't cheap, but I believe his Alpha Mount is the best on the market.

 

[dddoo7]

I have a surgeon 591 (rem clone) with built in 20moa rail and a #17 krieger barrel (very close to MTU). I like leupold mark 4 rings and normally use their medium rings, but had to use the High rings with this combination. Keep in mind that mark 4 mediums are like most people's low rings. the actual ring height can be checked on midway.

 

[bruiz86]

Ted with American Rifle Company is always willing to help and his new M10 rings are top tier.

 

[SuckitTrebek]

You can't do better than seekins rings.

 

[OptedOut]

Check out Talley Tactical rings, I've used them for a little over a year now. They have unique "lugs" that fit into the picatinny slots without any slop. You can purchase them direct from Talley or places like SWFA also.