Finally got my .260 all dialed in. The machine work was done by Mike Badella at BM Gunworks in Madera, Ca and the rest was done by me. The specs are as follows: Rem 700 blue printed; Krieger #18 light varmint contour, 5r 1:8 twist, chamber with PT&G .260 reamer with .060 freebore and a .295 neck, finished at 23 inches (22 from lug), threaded 5/8-24 with cap; BM bolt knob; Tubb recoil lug; FDE Cerakote; Manners T5 stock, textured with marine Tex, camo'd and pillar bedded with Devcon; PT&G bottom metal; AICS mags; pre 2006 OEM Remington trigger; TPS 20 MOA scope base, 8-40 screws, bedded to action. The scope is temporary until I get my tax return.
I actually found a load for it fairly quick:
Berger 140 VLD Hunting
46.4 gr RL22
Rem .260 brass
CCI 200
.010 from the lands
MV 2727
ES 34
SD 8
I actually found a load for it fairly quick:
Berger 140 VLD Hunting
46.4 gr RL22
Rem .260 brass
CCI 200
.010 from the lands
MV 2727
ES 34
SD 8
