Rifle Scopes NF 8-32x 56 and Strelok Pro questions

[GetReal]

I have found my 6.5 creedmoor rifle matches up perfectly with the elevation calculations of Streloc Pro .

But in 224 Valkyrie the Streloc Pro ballistic calculator doesn't match up with my on target hits at 400 yd as pictured below:

Strelok:

Actual target hits:

Any ideas why? Something in Strelok Pro set up like ballistic coefficient or velocity or something ??? ( I have triple checked and far as I can tell it's all set up right)

 

[lash]

Shoot also at 300, 600 and 800. Record your real world data (actual come ups) vs predicted by Strelok. Just single datapoint info (409 yards only) is not enough to go on.

 

[GetReal]

Shoot also at 300, 600 and 800. Record your real world data (actual come ups) vs predicted by Strelok. Just single datapoint info (409 yards only) is not enough to go on.

Makes sense. I *really* got to get to ranges longer than 400 yd. Tho I was hoping maybe others have seen this type of variations in a single caliber (e.g., 224V) , where the other caliber is dead on (e.g., 6.5 CM)


300 yd did show similar variation... Strelok diff thanactual targets. .

I'm wondering if any Strelok Pro settings could cause this.

 

[lash]

Post a screenshot(s) of your settings.

 

[GetReal]

 

[GetReal]

 

[littlepod]

In the strelok image, why does it say "Calibrated for 22X" just trying to understand the SFP aspect of your scope.

 

[GetReal]

In the strelok image, why does it say "Calibrated for 22X" just trying to understand the SFP aspect of your scope.

Honestly no idea. It "seems" wrong.... .

 

[littlepod]

Reticle subtensions only work at 22X it looks like -

So that's what the 22x means.

 

[littlepod]

Change your scope settings to put ranging power to 22x, it looks like it's set to 32x.

 

[GetReal]

Reticle subtensions only work at 22X it looks like -

View attachment 7336446

So that's what the 22x means.

I've got the scope at 32X for both 6.5 CM and 224 Valkyrie. Same scope on both rifles. The 6.5 is dead on but the 224 is off as pictured above.

So I guess I'm not understanding what the sub tensions only working at 22X means....

 

[littlepod]

Should say SFP, 22X

And should be .125moa adjustments.

 

[littlepod]

Once you set the SFP to 22X as ranging.

When you're zoomed into 32x, it should say "Scale = 0.69" in the reticle picture.

 

[GetReal]

View attachment 7336449

Should say SFP, 22X

And should be .125moa adjustments.

THIS makes sense ! Lemme try it.

 

[GetReal]

Once you set the SFP to 22X as ranging.

When you're zoomed into 32x, it should say "Scale = 0.69" in the reticle picture.

Nope. That didn't work. Sill showing 400 yd dead on the third hash.

I'll hafta try re-scaling to 22x next time I'm at the range, but that still doesn't explain why 6.5 CM works perfectly at 32 x.

 

[littlepod]

Can you show me your reticle picture again now that you've adjusted it to 22x / scale=0.69?

 

[GetReal]

Can you show me your reticle picture again now that you've adjusted it to 22x / scale=0.69?

It shows the 400 yd dstance onthe second hash.

 

[GetReal]

 

[littlepod]

Edit Scope/Reticle.

Make sure to set ranging to 22.0

Hit Calculate, click reticle.

Also make sure your sight height is correct on your .224. In this picture above, my sight height is 2.75"

 

[GetReal]

@littlepod ....I gotcha. Thanx !