Nosler 155 CC load?

[scorpion168]

Tried going thru stacks of posts for some advice on Nosler 155 CC. Which powder would be most recommended? IMR 4064 or 8208? Trying to get some loaded up for tomorrow.

 

[BCP]

Do a workup with either and see what happens.

My loads were 42gr H4895 in LC brass and 45grains varget in winchester commercial brass. 2.775" COAL.

 

[scorpion168]

H4895 works good? I have some. Can get more.

 

[Barry in IN]

I use 43.5 grains of 4064 with the Nosler 155. I get 2753 fps with a 25.5" barrel. I could go more, but that was a sweet spot and that vel is enough for me with a 155.
My buddy uses 44.0 grains.

 

[scorpion168]

Thanks Barry

 

[MCSO1357]

My load is HOT at 46.8 gr of Varget. 47.0 was better, but pressure signs around primer were evident. I use FGM brass.


Sent from my iPhone using Tapatalk

 

[NightHawkNZ]

One of my favourite projectiles! I run these in my Howa 1500 sporter barrel for avg of 0.5moa group but have seen as tight as 0.35moa.

45gr of ADI AR2208 which is varget in your land.
Federal 210 primers
FNB milsurp brass
2.775 COAL.

Never run them over the chrony.