Rifle Scopes One Piece 10MOA mount other than Spuhr

[LA260]

I cant seem to find any one piece 10MOA mounts that are not Spuhr. Does anyone know who makes one besides Spuhr? Thanks,

 

[wareagle700]

Are the Burris XTR Signature rings an option or does it have to be one piece? Depending on the inserts you use, you can have anything from 0 MOA-40 MOA.

 

[Jrb572]

Is there a reason for it only being a 10 moa mount?

 

[Jeffd]

I have also looked to no avail. I like to use them on 30 MOA rails to get to 40.

 

[Jeffd]

I cant seem to find any one piece 10MOA mounts that are not Spuhr. Does anyone know who makes one besides Spuhr? Thanks,

I have 1 new in box that I may let go for under my cost. It's a 34mm SPUHR.

 

[LA260]

Are the Burris XTR Signature rings an option or does it have to be one piece? Depending on the inserts you use, you can have anything from 0 MOA-40 MOA.

I would like it to be one piece.

Is there a reason for it only being a 10 moa mount?

The reason is that the new scope that I'm going to get (ZP5) has 96moa elev adj. The rifle (AI AT) comes with 20moa base so on paper a 20moa mount will work fine with about 8moa adjustment left assuming that 100yd zero will be right in the middle of scope adjustment at 48moa.

Issue is that on another rifle i couldnt get a 100yd zero with a 20moa base and a scope with 50moa elevation adjustment even though on paper it was supposed to work. The last thing I want to do is to pay $300-400 for a mount and run into problems.

I also have 30moa base on my 260 and feel its just about perfect for that cartridge. Gives more than enough adjustment for that round without coming close to maxing out the scope adjustment.
The AIAT is 6.5x47 so its very close to 260 when it comes to bullet drop.

I have 1 new in box that I may let go for under my cost. It's a 34mm SPUHR.

Thanks I will get in touch with you if I decide to go with Spuhr