- Thread starter nhassey48
- Start date
Re: Post your 190g SMK .308 load
Terry
Terry
Re: Post your 190g SMK .308 load
41.3 AA-2520 Nosler brass and Fed 210M primers, OAL 2.810 running a little over 2500fps...Here's 4 five shot groups at 175 while working around a good load..Shot out of a 10FCP with 1/10 twist, 24" barrel...top groups opened up because I adjusted scope and shot the centers out....
41.3 AA-2520 Nosler brass and Fed 210M primers, OAL 2.810 running a little over 2500fps...Here's 4 five shot groups at 175 while working around a good load..Shot out of a 10FCP with 1/10 twist, 24" barrel...top groups opened up because I adjusted scope and shot the centers out....
Re: Post your 190g SMK .308 load
My F-class load was Lapua case,F-210 M primer,41.5 gr Varget,over the 190 SMK.This was with a custom chamber and barrel,so the exact length will not help you,but they were touching the lands.They were slow,but they shot better at 600 than anything else that I tried. Pete
My F-class load was Lapua case,F-210 M primer,41.5 gr Varget,over the 190 SMK.This was with a custom chamber and barrel,so the exact length will not help you,but they were touching the lands.They were slow,but they shot better at 600 than anything else that I tried. Pete
Re: Post your 190g SMK .308 load
Nhassey,
I use N-550 when I can get it, and WLRs to light it. Bullets have a long jump in my factory Remington, but it doesn't seem to matter. I cannot keep them in the case if I try to touch the lands, so I went to the JLK 210s.
HTH,
DocB
Nhassey,
I use N-550 when I can get it, and WLRs to light it. Bullets have a long jump in my factory Remington, but it doesn't seem to matter. I cannot keep them in the case if I try to touch the lands, so I went to the JLK 210s.
HTH,
DocB
