Power pistol 115 gr. 9mm fmj Anybody know a good load data...cant find anyplace for that resipe

Xcount

Sergeant
Belligerents
Minuteman
Jul 31, 2009
234
21
6.0-6.2gr was a well known load published by a top National Match Beretta builder for 50 yard accuracy. work up, yada, yada, yada....
 

Disfunctional_Engineer

Sergeant of the Hide
Belligerents
Minuteman
Jul 27, 2020
310
350
Probably should have this in the reloading section.

That said Alliant has 6.7 max listed for a 1.125 COAL 9mm 115gr GHDP. Based on what I found on the net a GDHP is .525 OAL. To keep the case volume the same measure the length of your FMJs and see how much longer or shorter they are. If they're longer put them out of the case that much more or if they're shorter that much further in the case. This will let you keep the same internal volume in the case so you don't get excessive pressure. Reduce your load 10% to start and work your way up looking for pressure. 9MM is a small volume case so be careful loading it up.

https://www.alliantpowder.com/reloaders/powderlist.aspx?type=1&powderid=8&cartridge=23
https://czfirearms.us/index.php?topic=62657.0
 

R.W. (SNIPE)

"6.5 L.R."
Minuteman
Mar 17, 2020
43
20
Probably should have this in the reloading section.

That said Alliant has 6.7 max listed for a 1.125 COAL 9mm 115gr GHDP. Based on what I found on the net a GDHP is .525 OAL. To keep the case volume the same measure the length of your FMJs and see how much longer or shorter they are. If they're longer put them out of the case that much more or if they're shorter that much further in the case. This will let you keep the same internal volume in the case so you don't get excessive pressure. Reduce your load 10% to start and work your way up looking for pressure. 9MM is a small volume case so be careful loading it up.

https://www.alliantpowder.com/reloaders/powderlist.aspx?type=1&powderid=8&cartridge=23
https://czfirearms.us/index.php?topic=62657.0
Thank you..I appreciate the imput..figured with the popularity it would be an easy load up...I thought..