Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Site updates coming next Wednesday at 8am CT!
The site will be down for routine maintenance on Wednesday 6/5 starting at 8am CT. If you have any questions, please PM alexj-12!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body">I didn't have luck with it but you might. I did get it to 2400fps out of an 18" but there were obvious pressure signs.
Best use I found for 2000mr in 308 was with 175ish bullets and with 75+ weight bullets in 223. </div></div>
Thanks for the feedback.
Can you share your starting load and the load where you saw pressure?
If we are talking 308 Win. I used 48 gr. in a necksized Lapua case with 190 MK at around + - 2900 fps out of a 30" barrel slightly flat primers at the most. Accuracy was very good, will play some more, there is a potential I see.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: d_striker</div><div class="ubbcode-body"> Can you share your starting load and the load where you saw pressure? </div></div>
43.5 was my starting load, I think 45 was where it topped out. Was using PMC brass which is a lot like LC.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: d_striker</div><div class="ubbcode-body"> Can you share your starting load and the load where you saw pressure? </div></div>
43.5 was my starting load, I think 45 was where it topped out. Was using PMC brass which is a lot like LC. </div></div>