My humble Bergara B14 HMR in 6.5CM
Last edited:
1. Ruger RPR Gen 3, 6mm Creed, Seekins Handguard, Timney Trigger, Magpul PRS stock, Atlas Bipod (this is my son's rifle), Athlon Cronus BTR 4-29
2. GAP 6mm Creed, 26 inch barrel, Triggertech trigger (about to put in a diamond) Atlas Bipod, Tangent Theta 5-25 optic
3. Remington 700 custom by Alamo Precision Rifles, 6.5 Creed, Proof 24 inch barrel, AI Chassis, Timney Trigger, should have an SB 5-25 on it, but it is off right now
4. Tikka Tac A1, 6.5mm creed, pretty much stock, 24 inch barrel, Atlas Bipod, Nightforce ATACR 5-25 Mil-R
5. Modern Outfitters MR1, 6.5mm creed, 20 inch barrel, Leopold Mark 6 3-18
Last edited:
Just picked up this to test... Sako M10 in .338 ?
700 20” .308
Grayboe Terrain olive/black web
Timney 510
Zeiss 4.5-14x50 Conquest
PA M4-72 break
She’s all go, no show for sure
Grayboe Terrain olive/black web
Timney 510
Zeiss 4.5-14x50 Conquest
PA M4-72 break
She’s all go, no show for sure
Newly acquired GAP Precision Hospitaller in 300 win mag.
AI AXMC with 300WM barrel dressed up in her night gown. L3 CNVD-LR clip on and Steiner SPIR illuminator.
New Build for Jon Beanland in 6.5x284 Norma (Lapua Match Reamer)
- Defiance Deviant Tactical LA
- Krieger Medium Palma 26"
- Mcmillan A3-5 w/ KMW Loggerhead
- Seeking bottom metal
- Huber 2 stage trigger
- Nightforce ATACR 5-25x56 in NF rings
- ThunderBeast Ultra 7
- Atlas PRS
- Defiance Deviant Tactical LA
- Krieger Medium Palma 26"
- Mcmillan A3-5 w/ KMW Loggerhead
- Seeking bottom metal
- Huber 2 stage trigger
- Nightforce ATACR 5-25x56 in NF rings
- ThunderBeast Ultra 7
- Atlas PRS
Last edited:
AI AXMC with 300WM barrel dressed up in her night gown. L3 CNVD-LR clip on and Steiner SPIR illuminator.
Do you even operate bro? Love the rifle, and everything else attached!
AI chassis
Remington 700 LA
28 inch Krieger barrel chambered in 6.5 PRC
PT&G one piece spiral bolt
Atlas bipod
Spuhr 20 moa mount
US optics ER 5x25
Remington 700 LA
28 inch Krieger barrel chambered in 6.5 PRC
PT&G one piece spiral bolt
Atlas bipod
Spuhr 20 moa mount
US optics ER 5x25
My Remington 700 Police, all souped up and ready.
Remington usually takes a lot of crap here, but I would say that this one shoots.
5 shots from prone position, 300 meters away. Handloaded Lapua Scenar L 220 grain and VV N170 powder, Norma brass.
And no, it does not look like this every time, but the rifle is a solid sub moa rifle. I have taken it out to 1090 meters, and hopefully I will go even further before this years is over.
Im in the remington fan club
Vsf in .308 26"
Shoutouts to Badger Ordnance APA and B&T industries.
Also sporting the poor mans AI
827 yards with gusting oblique wind.
You could say it was luck or ass.
Surgeon 591 Action, Bartlein .308 20” 1:10, AI-AT 1.5 chassis, Area 419 Hellfire.
Work done by 5Toe Customs in Texas.
Work done by 5Toe Customs in Texas.
Defiance Action
Hawk Hill barrel in 6.5cm
Masterpiece Arms chassis
Harris bipod
Spuhr mount
Timney Calvin Elite trigger
MPA muzzle brake
Vortex Razor Gen 1
Remington 700 5R Gen 2 in .308
Timney 517 flat shoe trigger
MPA muzzle brake
Harris bipod
Vortex rings and Viper PST 6x24x50 FFP
Nice! How do you like the ATAC-R? Im considering one for my 6.5x47 Lapua.
Its fantastic. Im using the T3 and beginning to learn to use the wind dots. Ive managed to achieve maximum travel from the elevation turret with a 30 MOA rail. About 23 mil worth. I dont find the smaller objective any hinderance at all.
Seekins Havak Pro 6.5 CM
Steiner T5XI 5-25x56
Seekins low rings
PVA Mad Scientist brake
My first precision rifle build in 6.5 Creedmoor.
Action: Remington 700 SA
Barrel: 24" Proof Research M24 Stainless Steel
Chassis: XLR Carbon MLOK Chassis w/ Side Folding Adaptor
Optic: Burris XTR II 5-25x50 SCR MIL Illuminated FFP
Rings: XLR Tall 34mm rings
Bipod: Harris Bipod
Muzzle Device: SilencerCo ASR Muzzle Brake
Accessories: XLR/Hoptic 2-Round Quiver
XLR Bubble Level
XLR Barricade Stop
Action: Remington 700 SA
Barrel: 24" Proof Research M24 Stainless Steel
Chassis: XLR Carbon MLOK Chassis w/ Side Folding Adaptor
Optic: Burris XTR II 5-25x50 SCR MIL Illuminated FFP
Rings: XLR Tall 34mm rings
Bipod: Harris Bipod
Muzzle Device: SilencerCo ASR Muzzle Brake
Accessories: XLR/Hoptic 2-Round Quiver
XLR Bubble Level
XLR Barricade Stop
My first Precision Rifle. Savage 10 FCP-SR in 6.5 Creedmoor. 24" heavy fluted barrel and stock AccuStock and AccuTrigger.
Vortex Crossfire II 6-24X50 scope mounted in Vortex Pro Rings
Atlas BT-10 Bipod mounted on Atlas BT-15 3.35" rail.
Beartooth Comb Raising Kit 2.0 - looks cheezy and really works well on a budget minded build!
Vortex Defender Scope Caps
TAB Gear Large Rear Bag
Area 419 Hellfire Brake - not currently mounted
Shooting <.45 MOA with Hornady 140 Gr. ELD Match out to 200 yards so far - hope to be able to report the same at 600 yards by Summer end. Really surprised and happy with this gun as my first/baseline gun. With about $1K invested I doubt I'd be shooting any better with 2X as much invested. I think I got the last Savage 10 FCP-SR in 6.5 CM as I have not seen one listed (new) again.
VooDoo
Vortex Crossfire II 6-24X50 scope mounted in Vortex Pro Rings
Atlas BT-10 Bipod mounted on Atlas BT-15 3.35" rail.
Beartooth Comb Raising Kit 2.0 - looks cheezy and really works well on a budget minded build!
Vortex Defender Scope Caps
TAB Gear Large Rear Bag
Area 419 Hellfire Brake - not currently mounted
Shooting <.45 MOA with Hornady 140 Gr. ELD Match out to 200 yards so far - hope to be able to report the same at 600 yards by Summer end. Really surprised and happy with this gun as my first/baseline gun. With about $1K invested I doubt I'd be shooting any better with 2X as much invested. I think I got the last Savage 10 FCP-SR in 6.5 CM as I have not seen one listed (new) again.
VooDoo
MPA 6.5 in Competition chassis
26" MPA barrel w/brake
Bighorn TL3-SA action
Trigger tech diamond flat blade
Vortex Razor HD Gen II 4.5-27x56 MRAD
(scope does not hit night vision bridge)
Sorry for color difference
26" MPA barrel w/brake
Bighorn TL3-SA action
Trigger tech diamond flat blade
Vortex Razor HD Gen II 4.5-27x56 MRAD
(scope does not hit night vision bridge)
Sorry for color difference
Attachments
Last edited:
They discontinued the Model 10 in 6.5 Creedmoor and shortly after they re-released it as a Model 110 in 6.5 Creedmoor, LINK. Their naming convention is all screwed up, the 110 used to denote a long action and the 10 a short action. Now they are making short actions with the 110 name. Makes no sense.
Speaking of Savage, I finally finished my Savage build and can post it here as well.
Savage LRP Model 12 Target Action repeater
Criterion 26" 6.5 Creedmoor Barrel
AICS 1.5 chassis for Savage in Olive Drab
Ken Farrell 20 MOA base for LRP (20 MOA - SAV-PRES-TAR-20-A22)
Nightforce 30mm 1.0" rings
Atlas BT46 PSR bipod with BT19 Spigot
Area 419 Hellfire Brake
Vortex Viper PST Gen 1 6-24x50 FFP with EBR-1 reticle
Victor Co. Rear QD plate
Modified some Magpul QD sockets to fit in the front of the chassis (Link to DIY)
Couple of quick pics.
KMW LRS (Terry Cross) new SENTINEL HUNTER 11.75lbs in 6.5 Creedmoor. McWoody. Check out his web site.
Spent a couple hours at his shop a few week ago. You won't find a nicer, more professional builder anywhere!
KMW LRS (Terry Cross) new SENTINEL HUNTER 11.75lbs in 6.5 Creedmoor. McWoody. Check out his web site.
Spent a couple hours at his shop a few week ago. You won't find a nicer, more professional builder anywhere!
Broke out the Krylon to give these guys a touch up. Both 6.5x47's, Surgeon/Tikka Manners T5/T3. 
Rem 700 6.5 Creed, Bartlein 24’ barrel 1-8 twist, Vias brake, Timney trigger set at 2.5 lbs, Grayboe renegade, Ptg bottom metal, Harris bipod, Vortex 1.1’ rings, defender caps, bubble level, and Athlon Cronus btr. 
6br
Altas Action
Kelbly KTS Stock
Burris XTR2 4-20
CKYE-POD
= great day
Altas Action
Kelbly KTS Stock
Burris XTR2 4-20
CKYE-POD
= great day
The tikka plinker is finished for now. .308.
260 Rem
Savage action w/ accutrigger
Vortex Gen 1 Razor
XLR Evolution w/ folding stock
Spuhr Mount
Badger 20MOA rail
Accutac bipod
Shilen 30" Bull
300 Win Mag
ARC Mausingfield action
Calvin Elite trigger
Vortex AMG
American defense recon mount
arc 30moa rail
KRG Whiskey 3 w/folding stock. spigot mount added
Atlas quick release Bipod
Proof 28" Barrel
Cadex Defense MX1 muzzle brake
Savage action w/ accutrigger
Vortex Gen 1 Razor
XLR Evolution w/ folding stock
Spuhr Mount
Badger 20MOA rail
Accutac bipod
Shilen 30" Bull
300 Win Mag
ARC Mausingfield action
Calvin Elite trigger
Vortex AMG
American defense recon mount
arc 30moa rail
KRG Whiskey 3 w/folding stock. spigot mount added
Atlas quick release Bipod
Proof 28" Barrel
Cadex Defense MX1 muzzle brake
Last edited:
Cool rifle
Sent from my iPhone using Tapatalk
Save some more and buy Vortex PST GEN II 3-15 or 5-25 and keep the smile in your fave
This is just a tip for you mate.
Tikka T3X CTR 260rem.
Sterk swept bolt handle.
Timney 2-stage trigger.
MDT ESS chassis, with the 15" no rail forend, OD green ceracoted.
Ergo deluxe grip.
AICS 10-rd magazine.
Atlas prs bipod, with riflestick grapler feets.
Spuhr mount.
Kahles K624i gen III scope with msr ki reticle.
Ase Utra SL5i supressor(not in the picture)
Cole-Tac metal phyton supressor cover multicamo (not in the picture)
Yugo Mauser in aa98 Archangel stock
Krieger 5R 7mm barrel in heavy Palma contour
7X57 AI chambering, tightneck
Farrel 20 moa scope rail
side lever safety shroud win 70 style
Jard match trigger
Project still in progress....
Krieger 5R 7mm barrel in heavy Palma contour
7X57 AI chambering, tightneck
Farrel 20 moa scope rail
side lever safety shroud win 70 style
Jard match trigger
Project still in progress....
Remington 260 Barreled Action by LRI.
Whiskey-3 Chassis Gen.5 custom painted by Patriot Valley Arms.
Vortex Razor 4.5-27x56
Whiskey-3 Chassis Gen.5 custom painted by Patriot Valley Arms.
Vortex Razor 4.5-27x56
What is your bipod?
