• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Precision Rifles.....show em!!

[No message]
 

Attachments

  • photo51124.jpg
    photo51124.jpg
    81.4 KB · Views: 402
  • Like
Reactions: JakeM
RBros Rifles
Manners T2A Elite Tac Shell
RBros "Rogue" action (Defiance)
22" Broughton
Jewell Trigger at 1lb
Vortex Razor AMG
Seekins Precision Rings
SilencerCo muzzle brake and Omega suppressor (Armageddon cover)
Hawkins Precision bottom metal
Atlas rail & Atlas PSR
RRS QD plate attached by Travis on the stock
Feisol 3342 & RRS Universal Leveling Base
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i133.photobucket.com\/albums\/q78\/devldogs55\/RBros%201_zpssjo283t8.jpg"}[/IMG2]
 
Last edited:
This was the maiden match for this year's new blaster. It was just a tad wet.......both days...... This pic is from the Shamrock Shootout in Vale Oregon.

My rifle;
6mm Creedmoor
GA Precision Tempest
Proof Research 28" Heavy Palma barrel
XLE Evolution chassis with a folder
Jewel HVR at 9.5ozs
Area 419 Hellfire brake
Burris XTR II with the Horus H591 in Seekins rings

SPqCBrk.jpg
 
Nothing special, but it's a shooter. Savage 10 FCP-SR in 6.5 CM, Manners T2A (thanks to mtclaka for a great transaction and formerly in a B&C Medalist M40 with KMW Loggerhead installed by jducos aka stockdoc), Accurate Mag bottom metal, Burris XTR II 4-20x FFP SCR reticle, Seekins 20 moa base and rings. Hopefully some day Illinois will allow suppressors so I can take full advantage of the threaded barrel. Not holding my breath though...we were the last state to allow concealed carry, and that took a court order.

 

Attachments

  • photo51965.jpg
    photo51965.jpg
    62.4 KB · Views: 367
My new favorite:

DTA SRS-A1
6.5 Creedmoor Conversion
Vortex Razor AMG MRAD
ARC M10 QD-L Mount
Atlas Bipod
Silencerco Omega

mtB94vzdlks-LDwQZi0ONySZYFbH8G3IqxWP9oL9_xUaS9cGDWdWoNEzxBuGFnEe7y0ED9K-kG2AQ3fSnB17xc8DJ1ZJ9vkGojXWLtjB5IajzwInjHOHaWG4aEHzg1pig3Xk34UJegRJoRVtGKeI-bd4KaBBiZP82dcWFGLAxfb-QEIApi7IU2hyTSbq4wK_PdMMkbJM_tY0uqPw9TMueBq3qn--4VMhnyDl_dmnmdjoDBPKfl-mDEipebl9Uo-Pa6xRqkKpEHSByJnMdYC5ApPZ_H1e3XEVsu9nHokTbdH_XRmbNoONZv8k3bm2yQUb-6WIcdUGyP6YLDOh0Q38H5HXC9atA9TpDH3elwGNIiSY4_xbw2t-PmS7gPks8vk04I9ISZyNKJLEExuM60dMynDWIQIh_KxVrbwgJv4sLZwAW6yHZ982CLFyC_Ya7Jv9GBs7vB_KWnnHSVQEfEByIGpmyYs8QYKOjE6qtsD4RxAWK-P9gcmBRXNFVDKIONO2KzV4tlasFpw1rYLBlQQ_X246EHbGKkZQyHj-ErbhOM5MMpyf-zxkJ7qMurvdOzPs3qVeZuKlFv6DQiTRyBSyYHK2ZZrSNxNtVzlA2sjs2dAle-5kh-jgZg=w1299-h974-no
 
Remington 700 SS 5R Milspec .308
MDT Tac 21 Chassis/Magpul PRS stock
Ergo Deluxe Grip
JP Precision 1 piece mount
Vortex Gen2 Razor
Harris Bipod
Magpul 10rd PMag

This may not be a custom rifle in some ways, but it is one of the most accurate rifles I've ever owned. Consistently shoots less than 1/2 groups at 100 yards.
 

Attachments

  • 2017-03-11 08.44.30.jpg
    2017-03-11 08.44.30.jpg
    60.4 KB · Views: 307
Last edited:
Finally!!! Fucking finally!!!! I have something worth showing on here.

c4d935ba08344c3b7aee762086de49b9.jpg


Savage 10 FCP-SR
20" 308
Vortex pst
Bell and Carlson Tactical Medalist A-5

Future upgrades:
In a couple weeks it will have a CDI DBM
22" 260 Rem Pacnor 3 groove barrel


Sent from my iPhone using Tapatalk

Sweet man I know how you feel. I've been on here so long and my rifle will just be getting finished up here soon. I'll have a pic to follow. Sweet rifle.
 
Specs:
Rem 700 action
24 inch Medium Palma Bartlien 1:8 twist cerekote-Patriot brown
Vias muzzle brake 5/8x24
Timney trigger set to 2.5lbs
Ptg m5 bottom metal
Magpul 5 round mag
leupold 15 moa steel base
Medium Seekins rings
Weaver tactical 4x20x50mm
Grayboe Renegade
Harris bipod
Diy beer koozie cheek pad
 

Attachments

  • photo52817.jpg
    photo52817.jpg
    48.4 KB · Views: 408
WOW, so much super cool hardware in one place.
This is one I have been working on and shooting for several years. Have taken it out to 1,000 with repeatable good results.
Rem 700, 26" VFS barrel, printed, trued, .308W, 1:12 twist, Lancer Viper tunable brake. Timney 512 trigger.
REALLY likes Sierra Match and Gameking (168 and 165 gr) with generous supplies of Varget.
MPA chassis, EGW 20 MOA rail, Vortex Viper PST FFP scope, Burris rings. Runs 7.62 X 51 Magpul AC magazines. photo53004.jpgphoto53005.jpg
 

Attachments

  • photo53006.jpg
    photo53006.jpg
    51.7 KB · Views: 378
  • photo53007.jpg
    photo53007.jpg
    50.3 KB · Views: 315
Last edited:
RBros Rifles
Manners T2A Elite Tac Shell
RBros "Rogue" action (Defiance)
22" Broughton
Jewell Trigger at 1lb
Vortex Razor AMG
Seekins Precision Rings
SilencerCo muzzle brake and Omega suppressor (Armageddon cover)
Hawkins Precision bottom metal
Atlas rail & Atlas PSR
RRS QD plate attached by Travis on the stock
Feisol 3342 & RRS Universal Leveling Base
[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i133.photobucket.com\/albums\/q78\/devldogs55\/RBros%201_zpssjo283t8.jpg"}[/IMG2]

who dipped your stock?

 
IMG_0729.jpg
Nothing special. Just a prepicture before my build.
Rem700 LA - 30.06
Had a TA11B milled down, custom base made for this. Love it for hunting.
Sonic45.
Some other minor stuff.

New scope arrived, Premier Heritage 3-15x50.
Cant decide if a GRS stock is the right solution for me, or if AI is the right choice.
 

Attachments

  • IMG_0729.jpg
    IMG_0729.jpg
    125.1 KB · Views: 408
  • Like
Reactions: TexanHusker
my trick shot rifle,,it is really fun seeing the look on guys faces when I ring a plate that they cant with a 24X scope,,trued 700 with a 27" Krieger 8 twist HV 243 Win bbl in the AICS 1.5 chassis ,Atlas spigot mount bipod and PNW,,Gehmann,Anschutz,Mo`s sight set,,shooting 105 VLDs with H4350 at 3200 fps,,my best string so far is 5 in a row on a 10 inch plate at 1,025 yards,,guy witnessed it has a new Ruger RPR in 6.5CM and 4-20 Burris scope never touched the 10 inch plate,,fun day indeed,,LOL..

 
Here is my latest addition to my collection .

Barrett 98B Tactical .308 with 16" barrel
Scope : Nightforce NXS 3.5-15x50 F1

Took it out for the first time today and it shoots great. Very soft shooting . Ergonomically , it fits me very well and has an exceptional trigger . The bolt lift is stiffer than my AI AW, but I am guessing it will get easier in a short time . It also weighs significantly less than my AIAW. The magazine is arguably better than the AIAW, I really think Barrett magazine is near the top of its class.

I replaced the stock Barrett muzzle brake with a Silencerco ASR muzzle brake as I will be running this rifle with a Silencerco Saker 7.62 ASR.

I traded a Colt/ Cooper M2012 for this rifle an I have no remorse whatsoever except that Euro Optic recently blew out some MRADs at heavy discount and I might have preferred an MRAD.


9543f73a2ab24a0aebd097b6a4e4cce4.jpg



Sent from my iPad using Tapatalk
 
Last edited:
Impact 737 6.5x47L 26" Krieger 8.5 twist
AIAT
impact brake
Harris bipod
Built buy Stuteville Precision
 

Attachments

  • 20170418_100907.jpg
    20170418_100907.jpg
    39.5 KB · Views: 271
my trick shot rifle,,it is really fun seeing the look on guys faces when I ring a plate that they cant with a 24X scope,,trued 700 with a 27" Krieger 8 twist HV 243 Win bbl in the AICS 1.5 chassis ,Atlas spigot mount bipod and PNW,,Gehmann,Anschutz,Mo`s sight set,,shooting 105 VLDs with H4350 at 3200 fps,,my best string so far is 5 in a row on a 10 inch plate at 1,025 yards,,guy witnessed it has a new Ruger RPR in 6.5CM and 4-20 Burris scope never touched the 10 inch plate,,fun day indeed,,LOL..


Testimony that the shooter behind the rifle is more important to target acquisition than the rifle. I've seen guys at the range with $7K AI rigs that can't put a few shots together, much less in the bullseye.
 
300 norma mag built by Mile High Shooting Accessories



Defiance Deviant
Kmw sentinel
1:10 Bartlein finished at 28"
Timney calvin elite
Premier 5-25



Do you have any load data for that beast? I have a build going now that has a 1/10 Krieger at 28 inches. Just curious what bullets and powder you are using


Sent from my iPhone using Tapatalk
 
I do. I just finished load development on Sunday. I started at 81 and worked up to 85.5. 85 gr and above (which was the 3100+ fps range) the bolt lift was getting heavy and there were pretty good signs of pressure on the brass. This is what I ended up with:

84.5 gr h1000
Berger 230 hybrid
​​​​​​. 025 off lands
3030 Avg fps (the five shot string from the picture)
SD: 9.6





 
Remington 700- .308win
Greyboe Renegade stock
Badger rings and rail
SWFA SS 10x


Remington 700LR - .300 win mag
XLR Evolution chassis
Badger rings and rail
SWFA SS 20x
 
Our latest offering, the CWS-GEN-1-FP (Covert Weapon System) - (Folding Police)

- 308 Winchester
- In house developed, fully adjustable chassis system
- Hardy Rifle Engineering 16" 1:10 twist rate - carbon fibre wrapped match grade barrel
- Barnard Precision SM repeater action
- GCPD 4-port nitrided tool steel muzzle brake
- Interfaces 1) Picatinny rail 2) U.I.T rail 3) Keymod
- Monopod mounting
- 6x QD sling mount sockets
- Finish hard anodised MIL-A-8625 and TiAlN PVD


Web: www.gcpdarms.com
 
Damn those are nice! What are the specs on them??

Thanks!

First one is....
Remington 700 308 Win Varmint 26 inch
JEC Muzzle Brake
HS Precision Bottom Metal with 10 Rounders
Timney 510 2lb trigger
KRG Bolt Knob
Spuhr 35mm 1.18" Scope Mount
EGW 20MOA Rail
Bell & Carlson Stock
Vortex Razor HD 5-20 MOA Scope
Vortex Defender Flip Caps
Cerakote Austrian FDE
Weight ~ 14.9lbs unloaded

Second one is more of a long range hunting setup...
Remington 700 300 Win Mag 5R 24 inch
Hollands Muzzle Brake
Stock Bottom Metal
Timney 510 2.5lb trigger
Badger Aluminum Rings
Badger Aluminum 20 MOA Rail
McMillan A3-5 Stock
Leupold Mark 4 6.5-20x50 TMR Scope
Holland Level
Vortex Flip Caps
Cerakote OD Green & bolt fluted by Klampfeld
Weight ~ 12.1lbs unloaded
 
  • Like
Reactions: Curt_SK and Wyzrd
Thanks!

First one is....
Remington 700 308 Win Varmint 26 inch
JEC Muzzle Brake
HS Precision Bottom Metal with 10 Rounders
Timney 510 2lb trigger
KRG Bolt Knob
Spuhr 35mm 1.18" Scope Mount
EGW 20MOA Rail
Bell & Carlson Stock
Vortex Razor HD 5-20 MOA Scope
Vortex Defender Flip Caps
Cerakote Austrian FDE
Weight ~ 14.9lbs unloaded

Second one is more of a long range hunting setup...
Remington 700 300 Win Mag 5R 24 inch
Hollands Muzzle Brake
Stock Bottom Metal
Timney 510 2.5lb trigger
Badger Aluminum Rings
Badger Aluminum 20 MOA Rail
McMillan A3-5 Stock
Leupold Mark 4 6.5-20x50 TMR Scope
Holland Level
Vortex Flip Caps
Cerakote OD Green & bolt fluted by Klampfeld
Weight ~ 12.1lbs unloaded

That 300 made my pants move a little! Very nice set ups bud!!
 
photo55025.jpg


Accurate Ordnance
Mars .308
22" Rock Creek Sendero
A5
Timney CE
NF ATACR 5-25x56
 
Last edited:
  • Like
Reactions: Curt_SK
Very happy with this rifle and it's shooting good

-Cadex Dual Strike chassis.

-Cadex MX1 Muzzelbrake.

-Cadex DX2 Trigger.

-Stiller tac 338 action.

-Lilja barrel 1-9 32" long.

-Era-tac adjustable 0-70moa mount.

-Kahles 624i MSR reticle.

-Aadmount scope caps.

-Elite iron bipod in aluminum.

My load now is Lapua brasses, scenar 300grs, fed 215 primers and 87.2grs Vihtavuori 570 Powder.
Muzzle velocity is 848 m/s and ES is 5 m/s.
 

Attachments

  • photo55083.jpg
    photo55083.jpg
    72.7 KB · Views: 274
  • photo55084.jpg
    photo55084.jpg
    60 KB · Views: 282
  • photo55086.jpg
    photo55086.jpg
    38.7 KB · Views: 282
  • Like
Reactions: Curt_SK
My work in progress.
Savage ba10 stealth
EGW 20moa rail (upgraded from the flat stock one)
Vortex Razor gen II 4.5-27x56
Vortex precision rings
Harris bipod
APA little bastard gen II
 

Attachments

  • photo55728.jpg
    photo55728.jpg
    105.7 KB · Views: 253
  • Like
Reactions: TexanHusker
Most of the details are in my signature. It's my main competition rifle. 6.5 CM built on a GAP Tempest action and currently in a KMW Sentinel stock. I have a Manners PRS1 being built in their new Platinum layup with the MPA Barricade rail/chassis and then will try it out in both, and sell the one I like least. If the Sentinel could add a barricade stop/rail I'd be in love. Thing runs awesome still though. Let me know if you have any specific questions. Some nice rifles on here!
 
Most of the details are in my signature. It's my main competition rifle. 6.5 CM built on a GAP Tempest action and currently in a KMW Sentinel stock. I have a Manners PRS1 being built in their new Platinum layup with the MPA Barricade rail/chassis and then will try it out in both, and sell the one I like least. If the Sentinel could add a barricade stop/rail I'd be in love. Thing runs awesome still though. Let me know if you have any specific questions. Some nice rifles on here!

Sweet rifle. I am sure it will shoot either way you go. Hopefully I will get to post some pics soon. I have a 300 Norma being built by West Texas Ordnance as I type this message. The received the Stiller action today.

Action - Stiller TAC 338
Bottom Metal - Stiller
Scope Base - Stiller 40 MOA
Barrel - Krieger HV 28 inch 1-10 twist
Trigger - Trigger Tech
Stock - McMillan A5 McMillan camo
Scope- Bushnell Elite Tactical DMRi 2
Rings - Badger
Bolt Knob - Glades Crosshatch
Brake - West Texas Ordnance


Sent from my iPhone using Tapatalk
 
Deviant tactical 260, chambered by my dad, T4A elite, Bartlein 1:8 gap#6, Timney CE, Vortex Razor Gen II 4.5-27, SAS Reaper MX

6F856AA1-DA23-41B9-9C21-CD394F0D2BA0.jpg
4 foulers during load testing last week
3713BE8C-52C8-4C0D-9033-0860D04922E4.jpg


LRI 700, 260, T4A, Bartlein 1:8 M24, Timney 510, PTG M5 dbm, home bedding job, Razor Gen II 4.5-27, SAS Barricade


image_56029.jpg
image_56030.jpg

Typical group from it
86F81535-E657-4466-BDB6-FD5B29312D74.jpg
 

Attachments

  • 1CEF06F5-1149-4D64-8B00-D5844815ACB7.jpg
    1CEF06F5-1149-4D64-8B00-D5844815ACB7.jpg
    74.1 KB · Views: 400
  • image_56031.jpg
    image_56031.jpg
    77.1 KB · Views: 406
Rem 700 aac sd
Bushnell ERS
Vortex/seekins rings
Timney 510
Krg Xray
Disregard the ugly ass paint job, getting a new one when it warms up.


Did you ever get a new coat of paint on the rifle?


Sent from my iPhone using Tapatalk