Built my father a 22 creedmoor. Was supposed to be a Christmas present but was delayed on couple pieces. He is still super excited and it was fun to do for him.
Origin SA
Carbonsix 22 creedmoor prefit
Woox wildman
TT diamond
Origin SA
Carbonsix 22 creedmoor prefit
Woox wildman
TT diamond
My 6.5cm and rimx builds did end up pulling the sidewider off the 6.5 for a hellfire and planning to put arca rails on both before spring
Getting the itch to build another so might put a manners lrh on order for a .223 build
Getting the itch to build another so might put a manners lrh on order for a .223 build
How are the optics working out for you?
They work for what ranges i currently use but if i had more room i could see the need for better clarity at longer distances currently limited to 600
New Bartlein 6mm barrel that I just picked up from being chambered to 6 GT. It's one fat pipe. 
Vs. factory barrel.
Vs. factory barrel.
Manners TCS
Impact action
Proof SS 6.5cm
Atacr 7x35
APA brake
Latest iteration of my 6BRX. I did a long range shooting course last week and am now in love with my Kestrel 
We were smashing quite a few clays at 925m, I was pretty impressed with the way it all worked.
We were smashing quite a few clays at 925m, I was pretty impressed with the way it all worked.
And a very nice set of skins they are. Nice job, they made it a cool looking rifle.I recognize those skins!
.
Hi just read your post ,I have the same model , just installing the same pistol grip with a 3 port MDT muzzle brake ,Leupold MK4 4.5 x 14.5 x 50 TMR , very similar setup , using it for PRS style shoots in New Zealand .
I'm finding I'm getting vertical stringing for higher count shot strings ,10 _ 12 Rnd strings .
Have you found similar issues ?
Great wee rifles , love my SRS with four caliber now Recon Gen 2 scopeI think i'm finally happy with it. traded up to the razor gen 2
I've not seen any issues like that so far but I haven't done a whole lot of strings over 10(ammo is kinda hard to find in my area at the moment). But if I do happen to notice any in the future I will certainly reply and let you know if I do. What kind of ammo were you using?
Was at the range to check zero earlier this week.
Souped up Remington 700 police. Jury Custom barrels, AICS AX chassie, Atlas CAL, 5-25x56 PM2 in Spuhr ISMS, Ase Utra SL7bl. 300 Winchester magnum goodness.
Savage 110 LA chambered in 6xc. 26” international barrel. Hellfire match brake. Choate tactical stock. Arken EP5 5x25x56. Launching Berger 115 VLDs at 2950fps. Ready for F Class Open.
DT M2 w/ Steiner M7, .223rem, 6XC, .308Win, .300WM, .338WM, .338LM, a mix of DT/A419/APA brakes, UTG over bore bipod, basic bitch black.
Mossberg MVP .223 w/ everything but the receiver and bolt replaced, harris bipod, Jard trigger, Sonoran coral snake cerakote, A2 birdcage
Howa 1500 6XC, custom stock, USO, Harris bipod, Jard trigger, Deathstroke paint scheme, JP tactical brake
Savage 10 6XC, MDT & XLR, USO, everything but the receiver & bolt body replaced, Accu-Tac bipod, Jard trigger, Deadpool paint scheme, Cookie Cutter brake (one of the best functioning and least blast-y brakes I've ever used).
Those are the ones I actually shoot but I'm selling on the middle 2 and maybe the last one now that I have the DT.
Mossberg MVP .223 w/ everything but the receiver and bolt replaced, harris bipod, Jard trigger, Sonoran coral snake cerakote, A2 birdcage
Howa 1500 6XC, custom stock, USO, Harris bipod, Jard trigger, Deathstroke paint scheme, JP tactical brake
Savage 10 6XC, MDT & XLR, USO, everything but the receiver & bolt body replaced, Accu-Tac bipod, Jard trigger, Deadpool paint scheme, Cookie Cutter brake (one of the best functioning and least blast-y brakes I've ever used).
Those are the ones I actually shoot but I'm selling on the middle 2 and maybe the last one now that I have the DT.
Last edited:
Put together by yours truly. Specs:
| Type | Model |
| Action | Defiance Ruckus Tactical Medium (Rem 700 SA) - 20 MOA Integral Rail |
| Chassis | KRG Whiskey 3 Gen 6 - Folding, R700 SA, Sako Green |
| Barrel | Proof 6.5 CM 26" 1:8 Twist SS Competition Contour Ruckus Prefit |
| Trigger | TriggerTech Diamond - Pro Curved, Right |
| Mags | KRG .308 AICS 10 Rd. Mag - No Restrictor Plate x 2 |
| Muzzle Device | Griffin Armament 6.5CM Taper Mount Paladin 2-Port Brake |
| Optic | ZCO 4-20X MPCT3X |
| Optic Mount | [MB-M-36-38-20] M-BRACE Scope Mount (38mm-1.50in H, 20MOA-5.8MIL, 36mm ring size) |
New addition to the stable:
Action: American Rifle Company Archimedes
Barrel: X-Caliber SS 26" .308 Winchester M24/M40 Contour, 1:10" twist, 5R rifling
Optic: Vortex Viper PST Gen II 5-25x50 ffp Mrad
Stock: Bell & Carlson SA Target/Competition (for now)
Trigger: Timney Model 517 Flat Trigger 1.5 lbs
Bottom Metal: CDI Precision Gunworks
Brake: Area 419 Hellfire
Magazine: Alpha Type II AICS 10 round, MDT AICS 12 round
Action: American Rifle Company Archimedes
Barrel: X-Caliber SS 26" .308 Winchester M24/M40 Contour, 1:10" twist, 5R rifling
Optic: Vortex Viper PST Gen II 5-25x50 ffp Mrad
Stock: Bell & Carlson SA Target/Competition (for now)
Trigger: Timney Model 517 Flat Trigger 1.5 lbs
Bottom Metal: CDI Precision Gunworks
Brake: Area 419 Hellfire
Magazine: Alpha Type II AICS 10 round, MDT AICS 12 round
Put together by yours truly. Specs:
Type Model Action Defiance Ruckus Tactical Medium (Rem 700 SA) - 20 MOA Integral Rail Chassis KRG Whiskey 3 Gen 6 - Folding, R700 SA, Sako Green Barrel Proof 6.5 CM 26" 1:8 Twist SS Competition Contour Ruckus Prefit Trigger TriggerTech Diamond - Pro Curved, Right Mags KRG .308 AICS 10 Rd. Mag - No Restrictor Plate x 2 Muzzle Device Griffin Armament 6.5CM Taper Mount Paladin 2-Port Brake Optic ZCO 4-20X MPCT3X Optic Mount [MB-M-36-38-20] M-BRACE Scope Mount (38mm-1.50in H, 20MOA-5.8MIL, 36mm ring size)
Have you used the ZCO 5-27?
Do you feel the gain in FOV is worth the trade off of mag? Any other notes on glass, light transmission, etc. you care to speak to?
I ask because the 4-20 is seeming more and more like the better choice since I rarely go over 20x unless I'm trying to "spot" or view groupings, etc. I mean, I do use over 20x because I have it and the lever doesn't stop at 20 but I'm fairly certain I wouldn't miss it in competition and it may actually improve my performance with the larger FOV and less mag when you*/I are in the moment and just grabbing magnification on the clock.
*I mean 'you' in a general sense, not you specifically.
And one more time, That rifle scratches my itch. If you know what I mean.
|
Last edited:
This thread smells like freedom. Awesome rigs.
Thanks man!!
Have you used the ZCO 5-27?
Do you feel the gain in FOV is worth the trade off of mag? Any other notes on glass, light transmission, etc. you care to speak to?
I ask because the 4-20 is seeming more and more like the better choice since I rarely go over 20x unless I'm trying to "spot" or view groupings, etc. I mean, I do use over 20x because I have it and the lever doesn't stop at 20 but I'm fairly certain I wouldn't miss it in competition and it may actually improve my performance with the larger FOV and less mag when you*/I are in the moment and just grabbing magnification on the clock.
*I mean 'you' in a general sense, not you specifically.
And one more time, That rifle scratches my itch. If you know what I mean.
I haven't used the ZCO 5-27, but I've used scopes with 25x max magnification before. So far I don't miss the extra magnification and I've taken it out to 1200 yards.
In my limited experience lower magnification makes it easier to spot misses.
And thank you, it scratches mine too, which is why I built it
7 SAUM build
Specs:
MPA LH Competition chassis
ARC Nucleus Lefty LA 30MOA rail
27" Preferred barrel 1/8 twist .090 Freebore
Area 419 Sidewinder Brake
Timney 2 Stage trigger
Atlas Bipod
F3R Machine scope mount
Vortex PST Gen2 5-25
Specs:
MPA LH Competition chassis
ARC Nucleus Lefty LA 30MOA rail
27" Preferred barrel 1/8 twist .090 Freebore
Area 419 Sidewinder Brake
Timney 2 Stage trigger
Atlas Bipod
F3R Machine scope mount
Vortex PST Gen2 5-25
All 3
MDT Chassis (ESS,XRS,HNT)
IBI barrels in 6.5 CM (Carbon, Heavy, Heavy)
Triggertech triggers
Pristine Actions
My first custom build. I am thrilled.
Bighorn origin short
Criterion 26" MTU 6.5 creedmoor
KRG bravo with enclosed foreend
Leupold mk5 5-25 pr2 mil
Seekins high rings
Trigger tech primary flat
Dead air brake
Sdn-6 converted to keymo by ecco machine
Atlas bipod
Bighorn origin short
Criterion 26" MTU 6.5 creedmoor
KRG bravo with enclosed foreend
Leupold mk5 5-25 pr2 mil
Seekins high rings
Trigger tech primary flat
Dead air brake
Sdn-6 converted to keymo by ecco machine
Atlas bipod
Rimx in JAE chassis.
Waiting for the NV bridge now.
It sure will feel good to get the boomer out again. I haven’t shot it in over 11 months. (It took that long to get the barrel I wanted.) Come on spring!
PGWdti C14 TimberWolf .338LM
Hawk Hills barrel finished at 31”, 1:9” twist, 1.25” straight contour
Insite 5 port Heathen brake
NF NXS (sfp) 8-32x56 on a Spuhr mount
US Optics anti-cant bubble level
LRA F-class bipod
Load development will be forthcoming when the temperature gets above 50f. I’ll be trying a new powder for me, IMR4831. The bullets, brass, and primers won’t change. Lapua cases, Federal 215m primers, and 300gr SMK’s.
It’s hard to tell how big that new barrel is from the pictures. You just need to see it first hand. That’s why I call it a truck axle barrel.
6 creed I just finished up the other night.
A shooter at my club shot a one inch group at 600 yards (from a bench position) using an AI AXMC in 6BRA calibre,
You'll be needing a trip to the booze store, my dude!
Nice guns.
Front is defiance ruckus with a 20” proof 308, manners lrh stock, bix&andy prosport 2 stage, area 419 muzzle brake and arca rail, and mdt ckyepod. Running a vector continental 3-18, complete rifle is 9lbs 6oz
Furthest away is a lone peak fuzion with a 26” hawk hill 6gt barrel, trigger tech diamond 2 stage, manners prs2, area 419 brake, harris bipod, topped with a zco 4-20
Furthest away is a lone peak fuzion with a 26” hawk hill 6gt barrel, trigger tech diamond 2 stage, manners prs2, area 419 brake, harris bipod, topped with a zco 4-20
Attachments
MPA PMR in 6GT
Warne Scope mount
Athlon Ares ETR 4-30x56
Griffin taper mount compensator
Form 1 suppressor
Accu-tac Bipod (Christmas Gift)
A wet tiger spotted in the rain and ice...
Edit: RAW to JPG conversion plus watermark
Edit: RAW to JPG conversion plus watermark
Last edited:
A wet tiger spotted in the rain and ice...
This is just gorgeous! I like the hexagonal grip you got going on there.
what night bridge is on the TOP rifle?
