-
Having trouble using the site?
Contact support
Voere LBW M in .338 Lapua Magnum
Fritz got some good pics and I gotta brag on it some more. Can't get over how good it came out.
7SAUM AntiX XM built by Black Canyon Customs.
7SAUM AntiX XM built by Black Canyon Customs.
Swing your tripod head around 180 when you're actually shooting with it. The ball lock will function without hitting the magazine/bottom metal/stock giving better usability/function.
Figured that out quickly when I got one two weeks ago.
Figured that out quickly when I got one two weeks ago.
Posting from the range... trying out this hog saddle on the tripod, talk about wobble. Can't get full contact in the clamp with the TacOps. I'll try something else in it next time.
Defiance Tenacity Action
.308 win Chambered by Southern Precision Rifles “Bugholes”
Mpa Matrix Chassis
Bartlein 1-10 Heavy Varmint Profile
Nightforce NXS 8-32
American Rifle Company Rings
Timney “The Hit” trigger
.308 win Chambered by Southern Precision Rifles “Bugholes”
Mpa Matrix Chassis
Bartlein 1-10 Heavy Varmint Profile
Nightforce NXS 8-32
American Rifle Company Rings
Timney “The Hit” trigger
Last edited:
300 Win Mag 20” straight contour Proof cut by Alex Wheeler. Can is in jail.
300 PRC 24” Proof pre-fit. Blended muzzle brake done by LRI.
The first rifle is my TS 300 prc and the group below it has been repeated the last 4 trips out. .1-.2 is the norm on this rifle. Most consistent and accurate one I’ve ever had. It’s Terminus Kratos lite, 22” proof sendero and a GW clymr stock with a jewel trigger.
The second rifle is a TS built 6.5 prc. It’s what I ran in nrl hunter. It pretty much shot everything I’ve run in it 1/2 min but really likes retumbo and Berger 140s. 26” bartlein carbon on a origin with an xlr element and bix trigger.
New video is up with the R700 5R .308 Win showing supersonic and subsonics suppressed...
Wow @BuLLet …the EXACT same(left two) rifles I am planning to get in 1 pic down to the caliber. Well, minus the TT on the foundation although I’d love to have some day. Share (or DM) some of your personal opinions if you don’t mind. I know their spec inside out so wouldnt mind hearing things subjective to you…”how does the entire system feel btw the two”?
I’m planning on the PPR purchase this sept but I can also go the Foundation+737 route. It will be my PRS rifle.
Thanks!
I have had this rifle for a few months now, but I was waiting for the suppressor to finish the build. Didn't take long to put it to use. 6 GT, preferred barrel prefit for ARC Archimedes, KRG bravo and LHT 4.5-22, Omega 300 on a area 419 mount.
Just loving the the Foundation and Impact 737 as a package. This one is a lite fill model, so a bit different from the rest of what I have. All 4 of those rifles were purchased 'used' barely. Two with new barrels and calibers, one original (KMW) and one rechambered to 6mm Creedmor.
Impact got a new 6 gt barrel, the Bat got a new 6 gt as well. Don't have the Deviant in Manners Saltwater Camo with the 3, but that was the 4th one which was rechambered to 6mm Creedmor.
Superb quality and top notch shooters.
Impact got a new 6 gt barrel, the Bat got a new 6 gt as well. Don't have the Deviant in Manners Saltwater Camo with the 3, but that was the 4th one which was rechambered to 6mm Creedmor.
Superb quality and top notch shooters.
Shot this today @ the 200 yard sand pit. Brutal 94 degrees and windy, heavy mirage off the sand too. My best group of the day.
GAP Gladus, MCS TCS, Bartlien #7 1-8 223 Rem
69 SMK, 23 grains of Varget, New Lapua Brass
Little over 100 rounds down the pipe.
GAP Gladus, MCS TCS, Bartlien #7 1-8 223 Rem
69 SMK, 23 grains of Varget, New Lapua Brass
Little over 100 rounds down the pipe.
Last edited:
I don't see a lot of the blue camo on here and I understand it's not the most "camo" of camos, but man is it beautiful.
My 7mm RM in a XLR Carbon Fiber chassis
This one started life as a bit of a dog, but now wears a nice KRG Alpha
Savage Model 10 .308 & Blackhound 6-24
Savage Model 10 .308 & Blackhound 6-24
Zermatt Origin SA
Proof Research - carbon fiber -20” 6.5 CM
Sandman S
Manners LRH - custom paint
M5 mini chassis- Hawkins M5 dbm
Triggertech - special
Full length Arca rail
Leupold Mark 5 HD - 3.6-18x44 - illum
Hawkins rings
11 lbs
Thats quite impressive. I mean that sincerely. Looks like a great 100 yard group. Its a phenomenal 200 yard group. Good job!
This is almost the exact next build I was planning. Good choices, Excellent build !!
Best group of the day, but averages .5” groups.
This was with factory browning ammo too!
130 grain long range pro
Some Friday afternoon BAT action!
Sierra 107 SMK
Hornady GAP New Brass
34.5 grains H4350
CCI 400 Primers
Not my best shooting. Hot and Humid, like shooting in water...
Sierra 107 SMK
Hornady GAP New Brass
34.5 grains H4350
CCI 400 Primers
Not my best shooting. Hot and Humid, like shooting in water...
Who makes the nv bridge for the prs1?Some Friday afternoon BAT action!
Sierra 107 SMK
Hornady GAP New Brass
34.5 grains H4350
CCI 400 Primers
View attachment 7922649
View attachment 7922650
Not my best shooting. Hot and Humid, like shooting in water...
View attachment 7922651
View attachment 7922652
My latest, and something I've been enjoying during initial load development.
FN SPR A2 re-chambered in 6.5x47L that wears a 26" Krieger M40 contour in 1:8. The barrel was spun on and cerakoted by Matt Stewart of Stewart Rifles. I'm impressed to the point where he's got a second FN SPR of mine for another 6.5x47 (Brux barrel this time), as well as as an Origin and Krieger for my brother's 7mm RM. I can't say enough good things about Matt.
Sorry for the crappy informal photos.
It has some potential too. I just need to get off my ass and start using something better than a Harris bipod and $10 rear bag. Below are some five shot groups while I was looking for powder nodes.
130 Norma and H4350
123 Scenar and Reloader 15
123 Scenar and Varget
FN SPR A2 re-chambered in 6.5x47L that wears a 26" Krieger M40 contour in 1:8. The barrel was spun on and cerakoted by Matt Stewart of Stewart Rifles. I'm impressed to the point where he's got a second FN SPR of mine for another 6.5x47 (Brux barrel this time), as well as as an Origin and Krieger for my brother's 7mm RM. I can't say enough good things about Matt.
Sorry for the crappy informal photos.
It has some potential too. I just need to get off my ass and start using something better than a Harris bipod and $10 rear bag. Below are some five shot groups while I was looking for powder nodes.
130 Norma and H4350
123 Scenar and Reloader 15
123 Scenar and Varget
Eratac, only mounts I use now. So much so, I'm going to get rid of my Spuhr's.
ERATAC - one-piece mounts of various types › eratac
ERATAC mounts represent highest quality. We have one-piece mounts in short or extended versions, with adjustable inclination and other accessories.
www.eratac.de
What's the general price point for their mounts? I like the adjustable inclination version.Eratac, only mounts I use now. So much so, I'm going to get rid of my Spuhr's.
ERATAC - one-piece mounts of various types › eratac
ERATAC mounts represent highest quality. We have one-piece mounts in short or extended versions, with adjustable inclination and other accessories.
Adjustable last I bought was around 420. Non are in the high 200 range, last I bought.
Just checked.. $266 for non and $436 for adjustable... both for 36mm tubes.
2 weeks ago.
Just checked.. $266 for non and $436 for adjustable... both for 36mm tubes.
2 weeks ago.
Last edited:
Shot the BAT TR again today, with some Velocity testing. 200 yard sand pit, 88 Degrees and Soupy Humid!
10 shots.
10 shots.
Shot one of @Terry Cross twins today. 200 yard sand pit, bore sighted and a few into the backstop. First 3 groups on paper.
Had this March Scope NIB and just got it in the mount and gave it a whirl on the KMW.
A few inches low, middle group. Adjust and second group on left. Last set on top right.
Had this March Scope NIB and just got it in the mount and gave it a whirl on the KMW.
A few inches low, middle group. Adjust and second group on left. Last set on top right.
Last edited:
Changed the brake on the BAT TR to a Hellfire Match. Point of impact dropped 4 inches!
2nd group, adjusted
Final group
2nd group, adjusted
Final group
And the KMW again today @200 yards. Cloudy and only 76 degrees.
Just getting better, 25 rounds down the pipe.
Just getting better, 25 rounds down the pipe.
How does it do feeding from AW mags , I thought the AW dosnt like working with 2 lug 90 degree bolts ?
Cheers Chris
This BAT TR is starting to really sweeten up. Sand pit, 200 yds, 88 degrees with 15 mph gusts.
Really loving the 6 CM and Curtis Action
Bartlein CF M24/M40
Manners LRH with my Custom Cerakote
Blue Mountain chamber and brake
TriggerTech Diamond
7 shots at 500 yards.
Factort 109 Berger Hybrid Target
Bartlein CF M24/M40
Manners LRH with my Custom Cerakote
Blue Mountain chamber and brake
TriggerTech Diamond
7 shots at 500 yards.
Factort 109 Berger Hybrid Target
PS - this is what graphite black looks like when you clear it using their cosmic clear. This is 25% strength as 100% per the instructions makes it too glittery and more blue.
In case anyone is wondering was the cosmic clear additive does.
In case anyone is wondering was the cosmic clear additive does.
Full sex. Looking good brother!
