• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Precision Rifles.....show em!!

64070C16-B8C3-4037-93E1-F3EED77E138B.jpeg
 
Thanks. It’s been a labor of love.
Big Horn TL3
LRI 6.5 with ELDx chamber
KRG WKY3 folder Gen 6
JFE Dip
Atlas
Razor 3-18
Spuhr Rings
AAC SDN6 (currently getting rethreaded for Bravo)

So -1 for no Ckye Pod
What's the barrel length?
 
Insite Arms built 7mm rem mag.
1983 R700LA, Krieger 24” Sendero 1:8.5, McM Htg-Adj, Williams bottom metal, Heathen brake. Leica Amplus 6 3-18X44i
 

Attachments

  • 65A24E3C-1DB0-4828-9632-A0EBCA865999.jpeg
    65A24E3C-1DB0-4828-9632-A0EBCA865999.jpeg
    328.8 KB · Views: 189
  • 6796B394-316D-4782-838B-127944140551.jpeg
    6796B394-316D-4782-838B-127944140551.jpeg
    326.3 KB · Views: 199
  • AD0376AE-2D43-4FE6-99B4-14B9D2CD9934.jpeg
    AD0376AE-2D43-4FE6-99B4-14B9D2CD9934.jpeg
    122.5 KB · Views: 200
Last edited:
Not as precise as some, but likely precise enough for me, for now.

Presenting Blankie -- what every adult goes for at night when they are scared.

:)

- Howa 1500 HS Precision in .308 Winchester / Product Number HHS63103

- Howa Extended Bolt Knob

- MDT 20 MOA Picatinny Scope Base / Product Number 102189-BLK

- EGW Practical Aluminum Rings 1" Tube 1" High / SKU: 60200

- Mepota MeoPro 3-9x50 with #4 Reticle

- Carolina Shooter's Supply 1/2x28 Tabuk Flash Hider

- Wilderness Langlois Rhodesian Sling / Product ID: WLRS with 10" additional sling length

-Stan

FullSizeRender 2.jpg
 
Shot the new J Allen today!
Shot well. Comfortable with the new vertical grip and shorter length of pull. Balances well too.
Wow, didn't know they were shipping yet....just get it...or, I see you are from Winchester....any contact with @vagqman :cool:

I'm in Rockville and know him and believe he got an early pre-prod unit....no?
 
  • Like
Reactions: Zack_va248
Wow, didn't know they were shipping yet....just get it...or, I see you are from Winchester....any contact with @vagqman :cool:

I'm in Rockville and know him and believe he got an early pre-prod unit....no?
You’re correct! It’s his pre production chassis he got sent. He let me borrow it for some testing. It does quite well and I think will fit many shooters better with the more vertical grip
 
  • Love
Reactions: Baron23
You’re correct! It’s his pre production chassis he got sent. He let me borrow it for some testing. It does quite well and I think will fit many shooters better with the more vertical grip
I applaud the more vertical grip but wish that they moved the grip front strap closer to the trigger shoe as we did with the MKM grips for the OG JAE like this:

1661392914927.jpeg
 
Wow, didn't know they were shipping yet....just get it...or, I see you are from Winchester....any contact with @vagqman :cool:

I'm in Rockville and know him and believe he got an early pre-prod unit....no?
It does still have some things I’d like to see change however for PRS purposes. The taper just in front of the magwell prevents gamer plates from being able to slide back to the balance point perfectly.

The vertical grip could still be about a 1/2” closer and I feel would fit even more shooters better. I still have to stand off a touch to get a perfect 90.

Overall it’s improved from what it was and is no longer something that’s a no-go. But for the price, I do still feel it’s lacking in those small areas compared to other chassis and stocks well below its price point.

For prone/bench shooters though I feel it’ll be an excellent choice. Plus it’s looks are tough to beat.
 
  • Like
Reactions: Baron23
I applaud the more vertical grip but wish that they moved the grip front strap closer to the trigger shoe as we did with the MKM grips for the OG JAE like this:

View attachment 7941237
Agreed brother. OG with the vertical mkm looks to be perfect for most people with average sized hands. Plus the thumb shelf option
 
Last edited:
  • Like
Reactions: Baron23
So here is the first rifle I will assemble: Impact Precision 737R and Bartlein left gain twist barrel chambered for 6.5 PRC, cerakote to match the action, Geissele super 700 trigger, Foundation Genesis 2 stock dark distressed with Hawkins bottom metal, ARCA and Picatinny mounts for the RRS tripod and Atlas bipod, ZCO 527 scope and ZCO mount, Gunwerks 8ight suppressor. Hoping to have it done by mid to late October. Spent the $ so the hard part is done 😁 Pics to follow.
 
So here is the first rifle I will assemble: Impact Precision 737R and Bartlein left gain twist barrel chambered for 6.5 PRC, cerakote to match the action, Geissele super 700 trigger, Foundation Genesis 2 stock dark distressed with Hawkins bottom metal, ARCA and Picatinny mounts for the RRS tripod and Atlas bipod, ZCO 527 scope and ZCO mount, Gunwerks 8ight suppressor. Hoping to have it done by mid to late October. Spent the $ so the hard part is done 😁 Pics to follow.
Thats an all-out kind of build.
 
So here is the first rifle I will assemble: Impact Precision 737R and Bartlein left gain twist barrel chambered for 6.5 PRC, cerakote to match the action, Geissele super 700 trigger, Foundation Genesis 2 stock dark distressed with Hawkins bottom metal, ARCA and Picatinny mounts for the RRS tripod and Atlas bipod, ZCO 527 scope and ZCO mount, Gunwerks 8ight suppressor. Hoping to have it done by mid to late October. Spent the $ so the hard part is done 😁 Pics to follow.

Hell yeah! Congrats!!!

What gain twist will it be?
 
So here is the first rifle I will assemble: Impact Precision 737R and Bartlein left gain twist barrel chambered for 6.5 PRC, cerakote to match the action, Geissele super 700 trigger, Foundation Genesis 2 stock dark distressed with Hawkins bottom metal, ARCA and Picatinny mounts for the RRS tripod and Atlas bipod, ZCO 527 scope and ZCO mount, Gunwerks 8ight suppressor. Hoping to have it done by mid to late October. Spent the $ so the hard part is done 😁 Pics to follow.
Did you already buy the atlas bipod? If not I would strongly encourage looking at accu tac instead.. they are amazing the amount of lockup you get but I like my atlas as well
 
I’ve had the Atlas for several years, but I’ll take a look at the Accu tac for fun. Thanks!
Ya they are very expensive but man they are such a solid build quality and they have a wide variety of options! Check em out. And can't wait to see pics of that rig it sounds badass
 
I know this is all old hat to lots of you and yawn and stuff but this is my first center fire bolt gun and second bolt gun to my b14r that I’ve been using for NRL22, and I’m pretty excited about her. She’s left hand, m24 profile, 308, a MPA PMR2 that should be ok for production or tactical at prs, whenever I think I’m good enough to try that. The group was the first 100 yard group after “final” scope adjustments, with a Lithuanian M118LR clone that has performed very well for me with some 308 gassers. Glass is a mark 5 hd PR2. Possibly this month or next I can demonstrate eligibility and be allowed to shoot the local 600 yard match and add that to my match rotations - eventually I hope to re take some of the High Angle classes I’ve taken with gassers with this rifle as well as give PRS a try. It’s fun to learn and strive to be better.
A45AC7D1-4B86-48BC-8F52-8638D574C243.jpeg
 

Attachments

  • 3FDD7A77-1400-45EB-9558-1E193323FDA3.jpeg
    3FDD7A77-1400-45EB-9558-1E193323FDA3.jpeg
    938.5 KB · Views: 68
Last edited:
I know this is all old hat to lots of you and yawn and stuff but this is my first center fire bolt gun and second bolt gun to my b14r that I’ve been using for NRL22, and I’m pretty excited about her. She’s left hand, m24 profile, 308, a MPA PMR2 that should be ok for production or tactical at prs, whenever I think I’m good enough to try that The group was the first 100 yard group after “final” scope adjustments with a Lithuanian M118LR clone that has performed very well for me with some 308 gassers. Glass is a mark 5 hd PR2. Possibly this month or next I can demonstrate eligibility and be allowed to shoot the local 600 yard match and add that to my match rotations - eventually I hope to re take some of the High Angle classes I’ve taken with gassers with this rifle as well as give PRS a try. It’s fun to learn and strive to be better.View attachment 7943943
Mine is also the MPA PMR PRO 2.. All I did was put a new barrel on but man that loathar Walter barrel it comes with is great.. and honestly for the price you can't even build it cheaper. The only thing I would recommend is buy the earth magnet removable cheek piece. Makes it easier for cleaning so you aren't always trying to find your right height again. Unless you got the folder stock option
 
  • Like
Reactions: Mina_
Mine is also the MPA PMR PRO 2.. All I did was put a new barrel on but man that loathar Walter barrel it comes with is great.. and honestly for the price you can't even build it cheaper. The only thing I would recommend is buy the earth magnet removable cheek piece. Makes it easier for cleaning so you aren't always trying to find your right height again. Unless you got the folder stock option
I did get the folder, based on High Angle classes using an Eberlestock Gunslinger and hiking under low trees and such and therefore wanting less OAL (Ie more like a collapsible stock gasser). It’s a bonus that I don’t have to mess with the cheek riser when cleaning.
 
  • Like
Reactions: NFshooter150
2262675A-2D78-4B55-8E2E-219BC8C1B964.jpeg
My Lord does Travis @ TS Customs puts out some work art. What a beauty!!! Should be getting it next week sometime.

•Lone Peak Fuzion SS Nitride coated in copper orange
•Proof Sendero 22” 1:10tw 300wsm copper orange ends
•TS Customs KS1 Adjustable stock in a black, od green, grey, light grey ambush w/ copper orange cracked lines
•Hawkins Precision bottom metal w/ hunter mag copper orange
• TT Special 2 stage

Will be putting a TT315M Gen 2 MilDot on top sitting in some copper orange coated Hawkins rings… a TBAC ODG Dominus will be hanging off the end.
 

Attachments

  • A7ABF6D0-36DD-4721-9022-C84E90EC75D9.jpeg
    A7ABF6D0-36DD-4721-9022-C84E90EC75D9.jpeg
    345.4 KB · Views: 146
  • 37251660-3250-47F1-9817-CC5E9412D912.jpeg
    37251660-3250-47F1-9817-CC5E9412D912.jpeg
    507.9 KB · Views: 145
View attachment 7945383My Lord does Travis @ TS Customs puts out some work art. What a beauty!!! Should be getting it next week sometime.

•Lone Peak Fuzion SS Nitride coated in copper orange
•Proof Sendero 22” 1:10tw 300wsm copper orange ends
•TS Customs KS1 Adjustable stock in a black, od green, grey, light grey ambush w/ copper orange cracked lines
•Hawkins Precision bottom metal w/ hunter mag copper orange
• TT Special 2 stage

Will be putting a TT315M Gen 2 MilDot on top sitting in some copper orange coated Hawkins rings… a TBAC ODG Dominus will be hanging off the end.
That is gorgeous.
 
Not as precise as some, but likely precise enough for me, for now.

Presenting Blankie -- what every adult goes for at night when they are scared.

:)

- Howa 1500 HS Precision in .308 Winchester / Product Number HHS63103

- Howa Extended Bolt Knob

- MDT 20 MOA Picatinny Scope Base / Product Number 102189-BLK

- EGW Practical Aluminum Rings 1" Tube 1" High / SKU: 60200

- Mepota MeoPro 3-9x50 with #4 Reticle

- Carolina Shooter's Supply 1/2x28 Tabuk Flash Hider

- Wilderness Langlois Rhodesian Sling / Product ID: WLRS with 10" additional sling length

-Stan

View attachment 7940974
Not scared,just cautious and ready..you just never know what is lurking around at night.
 
  • Like
Reactions: stanley_white
6 mm Creedmoor day at the range. Loaded up some 108 ELDM, 37.8 grains of H4350, new Lapua brass. 200 yard sand pit.

Velocity in both rifles was about 2830.

20220902_161850.jpg


20220902_161857.jpg


20220902_161506.jpg

Pulled one :(
Ballistic-X-Export-2022-09-02 17_53_58.486049.jpg


20220902_154252.jpg


20220902_154222.jpg
 
Last edited: