2014 GA-Precision Hospitaller in 308 Caliber.
Templar V-II Action.
Bartlein 24" GAP #7 Contour Barrel with 1x11.25" Twist.
Threaded 5/8x24 for Suppressor.
NightForce 5-25x56mm ATACR.
Spuhr SP-4001 Mount.
Harris SBR Bipod.
She Hammers.
Templar V-II Action.
Bartlein 24" GAP #7 Contour Barrel with 1x11.25" Twist.
Threaded 5/8x24 for Suppressor.
NightForce 5-25x56mm ATACR.
Spuhr SP-4001 Mount.
Harris SBR Bipod.
She Hammers.
Last edited:
not sure if it is already in here but this is all I got. can hit stuff at 1k, I did upgrade to a 6-24 scope and Dead Air suppressor since this pic.
Scope and gun cost less than your scopes. And there is also a P365 in this pic..................
Scope and gun cost less than your scopes. And there is also a P365 in this pic..................
I busted out the MAP torch and a jig and bent it, and yep, it’s pivoting.
Foundation Genesis 2
Hawkins Bottom Metal
Impact Action
CRB 27" Comp in 6 dasher
Element Theos
ARC rings
Hawkins Updraft Brake
Group is the second 5 shots out of the barrel with rounds loaded for a different dasher. Four rounds touching one called flyer.
Hawkins Bottom Metal
Impact Action
CRB 27" Comp in 6 dasher
Element Theos
ARC rings
Hawkins Updraft Brake
Group is the second 5 shots out of the barrel with rounds loaded for a different dasher. Four rounds touching one called flyer.
My first bolt action ever. Took me months to put together piece by piece. I owe a good amount to the Sniper Hide community here. I've gained a ton of information reading up on personal preferences and their own reasons or whatnot for each part. All while keeping to what I can for how I would like it to feel, its use, and a bit visual. Thank you to all.. except the expense part.
-Lone Peak fuzion action
-Vision Pro
-TriggerTech Diamond 2 Stage
-Razor Gen III 6x36 sitting on Grey Ops CNC
-ACE break
-Lone Peak fuzion action
-Vision Pro
-TriggerTech Diamond 2 Stage
-Razor Gen III 6x36 sitting on Grey Ops CNC
-ACE break
Attachments
Good looking rifle. What is it chambered in and what barrel? Have you shot it yet?
Thanks. Havent shot yet. Going this weekend for the first time with a vet to give me some of his experience and got a weekend course set up later. Its a Bartlien m24 straight chambered in 308.
After the NRL Hunter match at Arena in March I tore down my rifle and rebuilt it from the ground up. Only part that is the same is my ZCO. Pumped to get this one broken in and shoot the Carbon Hill match in June.
I'll be finding out this weekend. Crossing my fingers that everything works together nicely.
My rifles
Savage 308 20”, MDT field stock, leupold MK 5 3.6-18x44, APA Brake.
11.4lbs
Bergara B14R 22LR 20”, MDT XRS, Vortex Strike Eagle 5-25x56
17.2lbs
Wiebad on both. They sell one for the XRS. I had to contact them and give them the sizing and they made me one for the field stock.
Cool. After I can acquire some more reloading supplies for dedicated practice rounds, I’ll be back out there.
Action arrived today so I slapped it all together. Robbed the optic off my 223 just to have something on top. Still bare bones but the ACC Elite is a nice upgrade from my old ESS. 26” Bart MTU 6.5x47 in Highland Green, Sniper Gray, (factory ) Black Cerakote.
I agree. The cover looks really good and so is the color. Enclosed forends make the aesthetics much better.
Goal was to make the heaviest gun within reason for competition. Got it in at 27lbs
-Nucleus inside a Xylo with all available weights
-PVA 26in Proof Comp
-Theta 7-35 inside ARC Mount
-Abel Theorem L
-Nucleus inside a Xylo with all available weights
-PVA 26in Proof Comp
-Theta 7-35 inside ARC Mount
-Abel Theorem L
My first attempt at anything precision. Just took a couple photos of it today. Bergara B14 HMR. Vortex Strike Eagle 5-25x56. Omega 300. Shoots lights out with the right combo of 169 SMK and 175 SMK. Today was the farthest I’ve really been able to take it, but ~15 mph switchy headwind and got my wife making impacts at 600 on a C zone with 175 SMK factory loads.
Culmination of a year or so….setting up my tool head to reload, didn’t want to get going until I had my rifle in hand.
Borden Mountaineer action, r/h bolt & l/h port, timed by Jim with a TT Diamond on a hanger.
Schneider stainless 1-7 medium contour at 28”, threaded 5/8-24 for a TBAC Gen2 Ultra 9 with a timed brake/adapter.
JAE chassis Cerekoated by BMC Custom Coatings then returned to Alamo Precision Rifles who chambered it in 6XC, threaded it on both ends, assembled and bedded into the chassis plus tuned the trigger.
It’s got an ARC M-Brace mount for the ZCO840 scope and as soon as I spin up some ammo I’ll see how it all shakes out.
I used a great friends almost exact rifle last year shooting prairie dogs in SD and that’s why this….115gr DTAC’s obliterated many at 650-750yds.
Borden Mountaineer action, r/h bolt & l/h port, timed by Jim with a TT Diamond on a hanger.
Schneider stainless 1-7 medium contour at 28”, threaded 5/8-24 for a TBAC Gen2 Ultra 9 with a timed brake/adapter.
JAE chassis Cerekoated by BMC Custom Coatings then returned to Alamo Precision Rifles who chambered it in 6XC, threaded it on both ends, assembled and bedded into the chassis plus tuned the trigger.
It’s got an ARC M-Brace mount for the ZCO840 scope and as soon as I spin up some ammo I’ll see how it all shakes out.
I used a great friends almost exact rifle last year shooting prairie dogs in SD and that’s why this….115gr DTAC’s obliterated many at 650-750yds.
Last edited:
just a solus in a solus. 6 GT blue mtn benchmark. My first real prs rig. Only 19 lbs as pictured so weights from dauntless engineering are on the way.
Defiance Ruckus Tactical Action
Proof 6.5cm steel barrel
Trigger tech flat faced
MPA BA Comp chassis
Seekins Rings
NF ATACR 5-25 Mil-XT
Area 419 Hellfire brake
Proof 6.5cm steel barrel
Trigger tech flat faced
MPA BA Comp chassis
Seekins Rings
NF ATACR 5-25 Mil-XT
Area 419 Hellfire brake
I finally got all the parts and pieces. First build in the new shop!
22ARC 1-7 25" Criterion. Mod 10 Salvage short action. Outlier chassis. AR folder. Arken EP-5 5-25
22ARC 1-7 25" Criterion. Mod 10 Salvage short action. Outlier chassis. AR folder. Arken EP-5 5-25
