Primer pocket uniformer question
- Thread starter Sogan
- Start date
I just use the uniformer, no issues using it every time. I've never used a brush, doesn't seem like they'd work very well.
I've ALWAYS used my primer pocket uniformer to clean the pockets and never had an issue.
Sometimes, when I wet tumble with SS pins, the primer pockets are so clean there no need for any further cleaning. Even so, I typically still like to use the uniformer to be sure the pockets are at a uniform depth as I tend to be a stickler about uniformity of my brass.
Sometimes, when I wet tumble with SS pins, the primer pockets are so clean there no need for any further cleaning. Even so, I typically still like to use the uniformer to be sure the pockets are at a uniform depth as I tend to be a stickler about uniformity of my brass.
I use the cutter to uniform the pocket on brass for the bolt gun, then do nothing after that.
I believe Dave Tooley said that he never saw a need to clean pockets, so with his years of experience, I took that at face value.
I believe Dave Tooley said that he never saw a need to clean pockets, so with his years of experience, I took that at face value.
I use mine everytime. It not only uniforms the bottom of the primer pocket but is an excellent tool for cleaning it. I also get a little brass each time so the brass does flow to the pocket just a little.
I have had to clean them after 10 or 15 reloads when the crud got so thick it wouldn't let the primers seat all the way.
A primer pocket brush works just dandy. Been using them for 10 years with no issue. Never really had much need for a cutter.
