Suppressors problems silencerco specwar 556 on Tavor SAR
- Thread starter rockwind1
- Start date
i probably should have mentioned i put on of those on already, although it may have been a different brand that had an extra qd sling mount hole. which i never use.
i read the reviews on midway, they were not that positive, i wonder why for some folks it works good and others it doesn't
i read the reviews on midway, they were not that positive, i wonder why for some folks it works good and others it doesn't
There are a few variables when dealing with tavor gas face. The biggest is probably the type of suppressor you're running and the next is the ammo you are feeding it. I know with mine (I run a socom 556 mini and standard and a 762rc) the IWI ammo that I used to buy in bulk was way dirtier than anything else I've fed it. I never noticed it until I put a can on it then the whole gun got nasty. Also you can try and seal it with silicon if you want, I didn't but I've heard of those that have.
Water gas in the face with all of the Surefire suppressors or was one better than the others?
Sent from my SM-N920V using Tapatalk
The 762 RC gives me the least gas in face and I think suppresses the best.
i went into a dark room and shined a surefire light into the open ejection port and then looked at the gearhead works port cover on the non-ejecting side, i could see tons of light coming thru, on almost every side of the cover so it is obvious that the gearhead works ejection port cover doesn't seal very well.
well, what a pain after spending 40 or 50 bucks on that gearhead works port cover. it totally did not seal. i took it off and put silicon around it. also put silicon around first half of rail, then put gorilla tape on the other half. also switched to using my 30 cal harvester suppressor. anyway, works really good now. i could have saved myself 50 bucks and used the stock ejection port cover though.
Similar threads
