Rifle Scopes Quick Detach Mount
- Thread starter CASE572
- Start date
Re: Quick Detach Mount
Yep, get a GDI. http://www.gdiengineering.com/
If that's a little too rich for your blood, American Defense makes a good mount as well. http://www.americandefensemanufacturing.com/browse/category/opticmounts/scopemounts/
Yep, get a GDI. http://www.gdiengineering.com/
If that's a little too rich for your blood, American Defense makes a good mount as well. http://www.americandefensemanufacturing.com/browse/category/opticmounts/scopemounts/
Re: Quick Detach Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhooker</div><div class="ubbcode-body">Does that mount have a built in level?
(the hi-dolla one)</div></div>
No sir, it does not. The Spuhr mounts do though.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TacticalDillhole</div><div class="ubbcode-body">LaRue. You get what you pay for.</div></div>
Very true...so when it comes to mounts, do NOT buy Larue.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhooker</div><div class="ubbcode-body">Does that mount have a built in level?
(the hi-dolla one)</div></div>
No sir, it does not. The Spuhr mounts do though.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TacticalDillhole</div><div class="ubbcode-body">LaRue. You get what you pay for.</div></div>
Very true...so when it comes to mounts, do NOT buy Larue.
Re: Quick Detach Mount
You can choose from several different mounts. I used the AD-Recon. You can lock down the mount wherever you need it to accommodate for the proper eye relief for each rifle.
You can choose from several different mounts. I used the AD-Recon. You can lock down the mount wherever you need it to accommodate for the proper eye relief for each rifle.
Re: Quick Detach Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KillShot</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhooker</div><div class="ubbcode-body">Does that mount have a built in level?
(the hi-dolla one)</div></div>
No sir, it does not. The Spuhr mounts do though.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TacticalDillhole</div><div class="ubbcode-body">LaRue. You get what you pay for.</div></div>
Very true...so when it comes to mounts, do NOT buy Larue. </div></div>
You have a bad experience? I rather like mine but always want to know what others think as well.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KillShot</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redhooker</div><div class="ubbcode-body">Does that mount have a built in level?
(the hi-dolla one)</div></div>
No sir, it does not. The Spuhr mounts do though.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TacticalDillhole</div><div class="ubbcode-body">LaRue. You get what you pay for.</div></div>
Very true...so when it comes to mounts, do NOT buy Larue. </div></div>
You have a bad experience? I rather like mine but always want to know what others think as well.
Re: Quick Detach Mount
Larue mounts, over time, damage the rail and have a tendency to work loose. Do a search on here and you'll find info about it.
Larue mounts, over time, damage the rail and have a tendency to work loose. Do a search on here and you'll find info about it.
Re: Quick Detach Mount
It's a case of bearing surface, you don't want the mount with the least amount of bearing surface on the rail, which is what the Army found out recently.
It's a case of bearing surface, you don't want the mount with the least amount of bearing surface on the rail, which is what the Army found out recently.
Re: Quick Detach Mount
This will be my next mount---->
http://www.bobroengineering.com/view/product/8/related/
It might fit your needs as well
This will be my next mount---->
http://www.bobroengineering.com/view/product/8/related/
It might fit your needs as well
Re: Quick Detach Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">It's a case of bearing surface, you don't want the mount with the least amount of bearing surface on the rail, which is what the Army found out recently. </div></div>
Good to Know, thanks guys.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">It's a case of bearing surface, you don't want the mount with the least amount of bearing surface on the rail, which is what the Army found out recently. </div></div>
Good to Know, thanks guys.
Re: Quick Detach Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CASE572</div><div class="ubbcode-body">Killshot have you ever put an american defense on a bolt gun?</div></div>
No sir, I have not.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CASE572</div><div class="ubbcode-body">Killshot have you ever put an american defense on a bolt gun?</div></div>
No sir, I have not.
Re: Quick Detach Mount
i run a bobro mount w/ a 4-16x50 pst on my grendel and switch it out to my savage 308 and they both retain there zero(differnt zero marks on scope for each rifle)
i run a bobro mount w/ a 4-16x50 pst on my grendel and switch it out to my savage 308 and they both retain there zero(differnt zero marks on scope for each rifle)
Re: Quick Detach Mount
Killshot, what do you think about the recon-SL model for a POF?
I have a POF w/ HSR rail and don't think I need the clearance for my optic. Also, because the rail sits a little higher on a POF, and I plan on using a CTR, I am not sure I want the extra height off the bore.
Killshot, what do you think about the recon-SL model for a POF?
I have a POF w/ HSR rail and don't think I need the clearance for my optic. Also, because the rail sits a little higher on a POF, and I plan on using a CTR, I am not sure I want the extra height off the bore.
Re: Quick Detach Mount
I use these http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/ARMS-22.html
The POF rail is designed so the bell of your scope can be as close to the barrel as possible. This is why I used these particular mounts. I have these mounted on a 308 POF. No issue returning to zero so far. My ACOG on my 5.56 returns to zero every time as well. Good luck and I hope this helps.
I use these http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/ARMS-22.html
The POF rail is designed so the bell of your scope can be as close to the barrel as possible. This is why I used these particular mounts. I have these mounted on a 308 POF. No issue returning to zero so far. My ACOG on my 5.56 returns to zero every time as well. Good luck and I hope this helps.
Re: Quick Detach Mount
Lone Wolf made a video review of the ADM mount vs. Bobro. From what I recall, the Bobro returned to zero better than the ADM. Having said that, I run an ADM mount, though I rarely remove it from my rifle. Lone Wolf also goes by 8541 Tactical.
Lone Wolf made a video review of the ADM mount vs. Bobro. From what I recall, the Bobro returned to zero better than the ADM. Having said that, I run an ADM mount, though I rarely remove it from my rifle. Lone Wolf also goes by 8541 Tactical.
Re: Quick Detach Mount
On my Ar15's I use a ADM extended recon and it reruns to zero fine but they are not what I would consider presision rifles (my LMT MRP is close).
I am in the same situation as the OP. For my mount I am going to try the Bobro. Seems to be well thought out.
On my Ar15's I use a ADM extended recon and it reruns to zero fine but they are not what I would consider presision rifles (my LMT MRP is close).
I am in the same situation as the OP. For my mount I am going to try the Bobro. Seems to be well thought out.
Re: Quick Detach Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WolfmansBrother</div><div class="ubbcode-body">Killshot, what do you think about the recon-SL model for a POF?
I have a POF w/ HSR rail and don't think I need the clearance for my optic. Also, because the rail sits a little higher on a POF, and I plan on using a CTR, I am not sure I want the extra height off the bore.
</div></div>
I can't advise you one way or the other because I haven't used that particular mount. Sorry man.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WolfmansBrother</div><div class="ubbcode-body">Killshot, what do you think about the recon-SL model for a POF?
I have a POF w/ HSR rail and don't think I need the clearance for my optic. Also, because the rail sits a little higher on a POF, and I plan on using a CTR, I am not sure I want the extra height off the bore.
</div></div>
I can't advise you one way or the other because I haven't used that particular mount. Sorry man.
Re: Quick Detach Mount
Well, I answered my own question. I bought an AD-Recon-S, 30mm. The centerline height is 1.47" which is excessive for a POF in my opinion (The rail on a POF is higher off the bore than a normal AR). With a good cheek weld I am looking strait into the lower rim of the scope.
I just ordered the SL (centerline 1.02") which should bring that down some but I am probably still going to need one of the cheek risers available from Magpul. I'm thinking the SL may still allow clearance of a low profile back-up sight?
Anyone happen to know of a set of back-up irons that are especially slim?
Well, I answered my own question. I bought an AD-Recon-S, 30mm. The centerline height is 1.47" which is excessive for a POF in my opinion (The rail on a POF is higher off the bore than a normal AR). With a good cheek weld I am looking strait into the lower rim of the scope.
I just ordered the SL (centerline 1.02") which should bring that down some but I am probably still going to need one of the cheek risers available from Magpul. I'm thinking the SL may still allow clearance of a low profile back-up sight?
Anyone happen to know of a set of back-up irons that are especially slim?
Similar threads
