Quickload Data

[striker nz]

Im asking a big favour, but does anyone who runs quickload able to run a load though it for me by chance?

7mm Rem Mag
28inch barrel
210m fed primer
65Grain Re22
175 smk

Im getting 3080Fps as is im just wondering what the pressure prediction is mainly,

Cheers
Striker

 

[Pinecone]

When I asked for this, I got nothing but grief that the writer of Quick Load did not want his product used to give out free runs.

Good luck.

 

[Clark]

I have been a Quickload owner and buying the updates for over 10 years.
I reload over 62 cartridges.
I use QL to get to the point where you are now faster.
The fine tuning of pressure is done by looking at the brass.
If the primer pocket gets loose or the growth ahead of the belt is too fast for you, then back off.
What the pressure is or what the pressure prediction is, are red herrings for you from this point forward with that load.
Your rifle will not get plastic deformation until 110 kpsi chamber pressure.
Your brass starts plastic deformation somewhere around 70 kpsi chamber pressure.
Back off two grains from that threshold.

7mmRemMag, the best cartridge in a 10 pound rifle, scope, bipod, sling, rear bag, and ammo.