Precision Rifle Gear Really Right Stuff 2021 SOAR

[Lowlight]

Some new and improved products are dropping at Really Right Stuff SOAR



As well they have updated the Bipod Adapter plates to remove the riser/adapter mount for Atlas & TBAC

 

[samb300]

Just ordered 2 of the new ARMS-LR SOAR bipod clamps, thanks @MPHReallyRightStuff for the great products!

 

[VDVSNIPER]

Been using the cinch since October for hunting. Are on my Swarovski 10x42 that are carried in a kuiu chest harness, fits in and out very well with no snag, very low profile

 

[JC0352]

@lowlight great video Frank! I’ve been drooling at the Zeiss lrf binos after @HogsLife had good things to say about them.

It would be cool to see that Ascend tripod go mainstream, like on Meateater. I think those guys would dig that tripod for what they do.

 

[Jefe's Dope]

@MPHReallyRightStuff

Thanks so much for this:

EXTREMELY helpful.

 

[MPHReallyRightStuff]

@Jefe's Dope, No problem. it is a tedious process but hoping it helps make the new website more of an educational experience rather than the, WTF does this mean?

 

[skatz11]

It’s nice to see a company listen to feedback and release cool products in a timely fashion. I’ll be getting a few of the qd bipod adapters eventually.

 

[MPHReallyRightStuff]

@skatz11 I will continue to try and do as you mentioned. It is hard some times as we do not receive that much feedback outside of the Hide. Youll enjoy the QD adapters. Will continue to work on the release process of our gear. Never introduce until ready to ship or almost there. The Ascend tripod was a learning point that hopefully will not happen again.

 

[JC0352]

@Jefe's Dope, No problem. it is a tedious process but hoping it helps make the new website more of an educational experience rather than the, WTF does this mean?

Those diagrams are much appreciated!

 

[sodakhunter]

I was lucky enough to snag a new Ascend tripod. I have used the 2 and 3 series for hunting spotting etc. and have no complaints. The Ascend from what i can see and feel will take these to the next level for hunting use. Cant see any issues with the tripod itself. Will have to get the ballhead out in the wet, dirt, snow, ice etc and see how it works.
This package seems to improve on lots of areas for someone like me who wants to drag a tripod around hunting.
Everything is a balance but my Anvil setup is gonna stay in the truck and the Ascend is gonna get the call this year. Cant wait. Smaller lighter shorter can only help.

 

[mrtoyz]

I was lucky enough to snag a new Ascend tripod. I have used the 2 and 3 series for hunting spotting etc. and have no complaints. The Ascend from what i can see and feel will take these to the next level for hunting use. Cant see any issues with the tripod itself. Will have to get the ballhead out in the wet, dirt, snow, ice etc and see how it works.
This package seems to improve on lots of areas for someone like me who wants to drag a tripod around hunting.
Everything is a balance but my Anvil setup is gonna stay in the truck and the Ascend is gonna get the call this year. Cant wait. Smaller lighter shorter can only help.

How does it compare with a 3 series for stability?

 

[Katana88]

The QD bipod latch looks really nice. Is there any reason one would prefer the older "thumb screw" version over the QD latch?

 

[MPHReallyRightStuff]

@Katana88 money, weight, or using an out of spec rail. I would guess those would be the likely reasons to chose the screw knob over the lever version.

 

[mrtoyz]

The QD bipod latch looks really nice. Is there any reason one would prefer the older "thumb screw" version over the QD latch?

I chose the knob and am happy I did. It’s quick adjustable, very easy to slide on a rail if needed and doesn’t take much pressure to lock it down snug.

 

[Wyfox]

@MPHReallyRightStuff what is the difference between the Ascend 14 and 14L?

 

[MPHReallyRightStuff]

@Wyfox

 

[Cascade Hemi]

The QD bipod latch looks really nice. Is there any reason one would prefer the older "thumb screw" version over the QD latch?

The throw lever mount is pretty bulky compared to the thumb screw mount.

 

[Dvlray6]

@MPHReallyRightStuff

Thanks so much for this:

View attachment 7550407

EXTREMELY helpful.

Would these dimensions apply to the TFCT33 ?

 

[Jefe's Dope]

Would these dimensions apply to the TFCT33 ?

Not sure.

 

[MPHReallyRightStuff]

@Dvlray6 Not completely. The TFCT tripods measurements have the Anvil-30 Ballhead built into them.

Sorry I do not yet have the diagram:

TFCT-33

• Leg Material: Carbon Fiber
• Number of Leg Sections: 3
• Load Capacity 1st Position Fully Extended: 85lbs/ 39kg
• Load Capacity 2nd Position Fully Extended: 50lbs/ 23kg
• Load Capacity 3rd Position Fully Collapsed: 65lbs/ 29kg
• 1st Position Maximum Height: 60.9"/ 155cm
• 1st Position Minimum Height: 25.9"/ 66cm
• 1st Position 2/3 Segments Extended: 43.0"/ 109cm
• 2nd Position Maximum Height: 24.9"/ 109cm
• 2nd Position Minimum Height: 19.1"/ 49cm
• 3rd Position Minimum Height: 7.0"/ 18cm
• Folded Length: 28.0"/ 71cm
• Folded Diameter: 5.7"/ 14cm
• (Heights and Length include the Anvil-30 Ball head attached)
• Weight: 4.66 lbs/ 2114g

 

[CrabsandFootball]

Been using the cinch since October for hunting. Are on my Swarovski 10x42 that are carried in a kuiu chest harness, fits in and out very well with no snag, very low profile

The metal or plastic one?

 

[VDVSNIPER]

The metal or plastic one?

The metal ones, never knew they had plastic ones.

 

[sodakhunter]

How does it compare with a 3 series for stability?

Pretty close with the center column all the way down. I almost always use mine sitting on the ground or out if the window of a blind so usually dont have legs extended all the way. With center column up past half way it does lose some stability but still useable for shooting. Its the cats ass for getting the height just right without dicking around with the legs. For a spotter its getting lretty close to having all the boxes checked. I was always snagging a tree branch or fence with the longer ones and sizewise this is way better. Will know more after using it for a season but for me it will improve on many areas.

 

[CrabsandFootball]

The metal ones, never knew they had plastic ones.

RRS SOAR - Home

soar.reallyrightstuff.com

 

[VDVSNIPER]

RRS SOAR - Home

soar.reallyrightstuff.com

When I bought mine back in October they didn’t have that option. Would like feel them side by side, that’s quite the price difference.

 

[Boon20]

For the unedjucated (me) whats the differences in series 2, 3 and 4?

 

[JC0352]

For the unedjucated (me) whats the differences in series 2, 3 and 4?

First number is leg diameter in mm. Second number is how many leg sections

 

[mlpkhl]

@JC0352 close but, the first number is the series of tripod 1,2,3,4 and they get larger as they go. Second number is how many sections. The listing I’ll include shows the ID of the leg collar which is the OD of the top leg section. It’s close to what you said but not on the money.

RRS SOAR - Home

soar.reallyrightstuff.com

Select the series buttons and you’ll see the ID change.

 

[Jcbusaf]

RRS. Great products great people to shoot with