Re: Reamer print help
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ARShuter</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">I'm assuming that you're looking for a no-turn neck right?
0.317 works for Lapua necked up 6.5x284
0.315 requires a slight clean up pass in Lapua and is borderline for WW 284 brass
0.313 requires turning in both. </div></div>
Yes I want a no turn neck but I'm told the real difference is in the body/base area. </div></div>
I've heard this also. However, I can't substantiate it. I can say my reamer is the PTG 284 "match", intended for Lapua brass. WW seems to work fine, though it seems to fit tighter, as I've had to SB size them to fit my chamber...even new WW, out of the bag, through an FLS, and into the chamber is slightly tight, and rubs a bit about 1/2" up from the Casehead.