hello, wondering if someone could help me figure out which redding competition dies i need. they will be for my .308 for F T/R competition, on grafs.com there are 8 different choices and i have no idea which one i need. can someone educate me, or point me to a website that can instruct me on this. thanks guys.
Join the Hide community
Get access to live stream, lessons, the post exchange, and chat with other snipers.
Register
Download Gravity Ballistics
Get help to accurately calculate and scope your sniper rifle using real shooting data.
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
-
Quick Shot Challenge: Caption This Sniper Fail Meme
Drop your caption in the replies for the chance to win a free shirt!
Join the contest
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
redding competition dies
- Thread starter beergoggles
- Start date
Re: redding competition dies
I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
You need a bushing too for the sizing die, that size bushing will depend a little on your brass.
I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
You need a bushing too for the sizing die, that size bushing will depend a little on your brass.
Re: redding competition dies
I got mine from Sinclair Redding Competition Die Set 308 W The representatives at Sinclair are very knowlegable and can be of great help in answering your questions.
Redding is a great choice, I wouldn't use anything else.
I got mine from Sinclair Redding Competition Die Set 308 W The representatives at Sinclair are very knowlegable and can be of great help in answering your questions.
Redding is a great choice, I wouldn't use anything else.
Re: redding competition dies
thanks guys, i think i will call sinclair int., they have a great reputation.
thanks guys, i think i will call sinclair int., they have a great reputation.
Re: redding competition dies
You can also call Redding direct and they are super nice. Before you order remember there are midway coupon codes on the hide that can save you money by ordering at midway. I just ordered the sets and it came out a lot cheaper.
You can also call Redding direct and they are super nice. Before you order remember there are midway coupon codes on the hide that can save you money by ordering at midway. I just ordered the sets and it came out a lot cheaper.
Re: redding competition dies
awesome, thanks....this may be a stupid question, but where do i find the midway coupon codes on the hide? thanks berger king.
awesome, thanks....this may be a stupid question, but where do i find the midway coupon codes on the hide? thanks berger king.
Re: redding competition dies
The same category you posted this thread there is a title "Midway Codes". If you scroll down you will find the current ones, good luck!
The same category you posted this thread there is a title "Midway Codes". If you scroll down you will find the current ones, good luck!
Re: redding competition dies
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
You need a bushing too for the sizing die, that size bushing will depend a little on your brass.
</div></div>
+1 This is what you need. Measure the OD of a loaded cartridge around the neck and buy two bushings: .002 & .003 less than this number.
You will also need a bunch of measure tools and may want an expanding mandrel, but this is beyond the scope of your question.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
You need a bushing too for the sizing die, that size bushing will depend a little on your brass.
</div></div>
+1 This is what you need. Measure the OD of a loaded cartridge around the neck and buy two bushings: .002 & .003 less than this number.
You will also need a bunch of measure tools and may want an expanding mandrel, but this is beyond the scope of your question.
Re: redding competition dies
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
</div></div>
Thanks for that tip. I was looking at Redding Competition dies the other night for .338 lapua and was thinking the Type-S matched my needs. I only want a full length sizing die and a bullet seating die, so the 2 die set seems to be fit the bill perfectly.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">I would recommend
http://www.midwayusa.com/viewProduct/default.aspx?productNumber=271533
</div></div>
Thanks for that tip. I was looking at Redding Competition dies the other night for .338 lapua and was thinking the Type-S matched my needs. I only want a full length sizing die and a bullet seating die, so the 2 die set seems to be fit the bill perfectly.
Re: redding competition dies
I have the competition seater and use either the FL or NK sizer. What is the benefit to the competition sizer or bushing sizer that I might need in the future? Don't know so I'm just asking.
I have the competition seater and use either the FL or NK sizer. What is the benefit to the competition sizer or bushing sizer that I might need in the future? Don't know so I'm just asking.
Re: redding competition dies
[/quote] +1 This is what you need. Measure the OD of a loaded cartridge around the neck and buy two bushings: .002 & .003 less than this number.
You will also need a bunch of measure tools and may want an expanding mandrel, but this is beyond the scope of your question. [/quote]
wow, i may be in a little over my head.
[/quote] +1 This is what you need. Measure the OD of a loaded cartridge around the neck and buy two bushings: .002 & .003 less than this number.
You will also need a bunch of measure tools and may want an expanding mandrel, but this is beyond the scope of your question. [/quote]
wow, i may be in a little over my head.
Re: redding competition dies
thanks for all the replies, as far the expander mandrel; i guess it would be dependent on the diameter of the rifle throat?
thanks for all the replies, as far the expander mandrel; i guess it would be dependent on the diameter of the rifle throat?
Re: redding competition dies
A mandrel is a "nice-to-have" replacement for the expander button on a sizing die. Most folks who use a full-length bushing die will remove the expander button. It is removed for several reasons.
The size of the mandrel is related to the bullet diameter and has nothing to do with your chamber. In practice, there are only two choices: an "expander" mandrel and a "turning" mandrel which are about .001 & .002" under bullet diameter respectively. The expander mandrel is only used when going for extremely light neck tension.
A mandrel is a "nice-to-have" replacement for the expander button on a sizing die. Most folks who use a full-length bushing die will remove the expander button. It is removed for several reasons.
The size of the mandrel is related to the bullet diameter and has nothing to do with your chamber. In practice, there are only two choices: an "expander" mandrel and a "turning" mandrel which are about .001 & .002" under bullet diameter respectively. The expander mandrel is only used when going for extremely light neck tension.
Similar threads
- Replies
- 4
- Views
- 264
