Redding powder measure owners - I need some measurements

[Warpspeed]

If you own a Redding 3 measure or one their 10X measures, I need a favor.

Can you measure the ID of the measure where the hopper would go in?




Reply here or via PM - thanks

 

[Milo 2.5]

If you own a Redding 3 measure or one their 10X measures, I need a favor.

Can you measure the ID of the measure where the hopper would go in?



Reply here or via PM - thanks

I have a BR-30 and 10X, but honestly don't understand, "Can you measure the ID of the measure where the hopper would go in?" All hopper diameters are different. BUt will help if I can.

 

[Warpspeed]

I have a BR-30 and 10X, but honestly don't understand, "Can you measure the ID of the measure where the hopper would go in?" All hopper diameters are different. BUt will help if I can.

What is it they say, " a picture is worth a thousand words"?

It was hard to hold the calipers and take a picture at the same time but you get the idea.

 

[Milo 2.5]

What is it they say, " a picture is worth a thousand words"?

It was hard to hold the calipers and take a picture at the same time but you get the idea.

Haha, I was a total dunce, it was too easy, thought you meant hopper size. My measurements mirror yours. If looking for replacement or larger hoppers, Midway sells them.

 

[Warpspeed]

Haha, I was a total dunce, it was too easy, thought you meant hopper size. My measurements mirror yours. If looking for replacement or larger hoppers, Midway sells them.

I make replacements using Pyrex instead of plastic and trying to verify the dimensions. I actually get a measurement of closer to 2.160 when I don't have to balance the camera. lol



Are you saying you get a measurement of 2.130" ?

 

[Milo 2.5]

i make replacements using pyrex instead of plastic and trying to verify the dimensions. I actually get a measurement of closer to 2.160 when i don't have to balance the camera. Lol



are you saying you get a measurement of 2.130" ?

2.134" 10x
2.132" br-30

 

[TripleBull]

Those glass hoppers look good, Warpspeed!

 

[Warpspeed]

2.134" 10x
2.132" br-30

thanks!

 

[Warpspeed]

Those glass hoppers look good, Warpspeed!

Thanks - I make them for the Dillon, Hornady & RCBS measures. Trying to figure out the Redding . Also have them for the RCBS Chargemaster & Hornady Auto Charge.

 

[Milo 2.5]

thanks!

Sorry about the original confusion, I really thought you were asking for actual measuring hopper, all diff sizes. I was kicking myself for offering help, woulda had to pull them apart, lol

 

[dttheliman]

2.150 (not on the screw side) to 2.153 (screw hole to screw hole) on 30BR with no movement - the original hopper tube is 2.145 - and put me down for one

 

[Warpspeed]

Thank you guys for your help - it seems that Redding has made two different sizes.

 

[dttheliman]

Warpspeed - it arrived today - it is the bomb - seriously nice - thanks bud

 

[ctravisc]

still selling these, @Warpspeed ?

 

[Warpspeed]

still selling these, @Warpspeed ?

yes - dramworx.com