Gunsmithing Rem 700 receiver print?

[CS223]

Wondering if anyone has a print or CAD drawing of a stock 700 receiver that they can share. Interested in the dimensions related to the top scope mount area, namely the rear bridge radius and the specified difference between the height of the rear bridge compared to the front.

 

[Jo.]

Re: Rem 700 receiver print?

+1
Was looking for the same information.

 

[gsuty17]

Re: Rem 700 receiver print?

Rear Radius is 2.025", front is .6785" and is .114" taller than the rear. These are good dimensions from a drawing.

 

[colchester]

Re: Rem 700 receiver print?

Have the clip slot drawing if you need it Not sure how to post it

 

[CS223]

Re: Rem 700 receiver print?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigG</div><div class="ubbcode-body">Rear Radius is 2.025", front is .6785" and is .114" taller than the rear. These are good dimensions from a drawing. </div></div>

Many thanks! That is exactly what I was after.

73 fastback:
It would be good to have the clip slot info just to archive, if you have it as an image file, you can email it to me and I'll host the image and post it here for the benefit of others.

 

[colchester]

Re: Rem 700 receiver print?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CS223</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigG</div><div class="ubbcode-body">Rear Radius is 2.025", front is .6785" and is .114" taller than the rear. These are good dimensions from a drawing. </div></div>

Many thanks! That is exactly what I was after.

73 fastback:
It would be good to have the clip slot info just to archive, if you have it as an image file, you can email it to me and I'll host the image and post it here for the benefit of others. </div></div>
I only have the actual print on paper I would be happy to mail or fax you a copy send your info via pm and Ill get it to you