Replacement Foam for a Storm 3300 case

[DIBBS]

Trying to do some research on replacement foam for a Storm (or another manufacturers) rifle hard case. There seem to be several companies that sell products, for example:

https://www.cobrafoaminserts.com/pr...ase-im3300-polyethylene-foam-inserts-2-pieces

https://patriotcases.net/product/replacement-foam-set-for-skbpelicanstorm-rifle-cases/

Does anyone have any experience with either of these vendors, or have another recommendation?

 

[krw]

Tag

 

[Terry H]

Kaizen foam is a great option for rifle cases. It's very firm but easy to cut. Manufactured in 1/8" layers so you can cut and peel out to whatever depth you need. I spray glued felt to mine.before I made the cuts. Makes for a pretty cool case. Comes in different sizes and thicknesses.

 

[J!m]

I have a source for bottom foam all cut ready to go for less than all the other guys are charging.

I bought two two pieces myself. I do t have the photos on my phone any longer but it’s formed for a scopes rifle, mil spec cleaning kit and extra storage.

PM me if interested.

 

[Danco411]

You can get them pre-cut at the Foam Factory to fit your case. 15.5x13.5x3 runs about $20 each. This is the firm charcoal foam. It's not quite as dense as the factory Pelican stuff but it works great and is easy to cut.

http://www.foambymail.com/custom-cut-foam-dimensions.html?category_id=236&shape_id=14

Just plug in your dimensions.

 

[J!m]

I was going to say that’s an amazing price but then I saw it is not pre-cut for the wespon and accessories.

 

[Sogan]

You can get them pre-cut at the Foam Factory to fit your case. 15.5x13.5x3 runs about $20 each. This is the firm charcoal foam. It's not quite as dense as the factory Pelican stuff but it works great and is easy to cut.

http://www.foambymail.com/custom-cut-foam-dimensions.html?category_id=236&shape_id=14

Just plug in your dimensions.

This is what I use. You can make yourself a cheap hot wire cutting table or use an electric knife. My set ups are constantly changing an I like to be able to cut new set ups for cheap.