What stock is that?
- Thread starter keith jones
- Start date
Just finished putting all the doo-dads on my new 10/22.
50 yds, scope illumination turned off.
50 yds, scope illumination turned on.
50 yds, scope illumination turned off.
50 yds, scope illumination turned on.
Range time, 25/50/100m shooting, 5rnd groups. Well, its 1980’s optic, so sun is mutch welcome. My USMC Unertl, is a couple step up, but .22 is fun to shoot here as Vintage config. I’m vintage too, came to think about it…
Attachments
Got the blessing for this little joker aka "The cute and useless SBR". 
I have a TCS and want to love it, but it's a pita to balance so mine is still in Matrix pro.
The salt water patten is awesome.. 22" MTU? And weights in the arca?
See I was having issues getting it balanced in matrix. My matrix has external gray ops weights in front and still back heavy with my 20” MTU. Now it’s good in TCS fully weighted on arca rail. No back weight. Weighs 17.3 in TCS like you see it.
How do you like the Mark 5? Thinking about it for my Vudoo build. Just hesitant due to the 50yd parallax.
I would steer away from a scope with minimum parallax at 50. I have an Athlon Cronus Gen2 and have regrets with it only going down to 25...other than that it's an outstanding scope.
I’ve had zero issues at 50yds. Then again all I shoot is 50+. Mark 5 glass and turrets are hard to beat for the money.
My latest, 457 Lilja in an MDT XRS. Just mounted the scope, heading to the range soon.
With my Vudoo, I don't "need" to shoot it at less than 25 yards, (min parallax for the Cronus), but in a match that has thrown in 15 yard off hand 1/2" swinging targets, being able to see the target(s) clear might have helped. Bad enough shooting a 17# rifle off hand as it is. I've only been in one match that had that kind of stage, I think I scored 3/10...
Edit add: probably would have helped more if my dumb ass had cranked the zoom down from 20x...live and learn.
I’m going with the NX8 just for that reason. Parallax down to 11 yds.With my Vudoo, I don't "need" to shoot it at less than 25 yards, (min parallax for the Cronus), but in a match that has thrown in 15 yard off hand 1/2" swinging targets, being able to see the target(s) clear might have helped. Bad enough shooting a 17# rifle off hand as it is. I've only been in one match that had that kind of stage, I think I scored 3/10...
Edit add: probably would have helped more if my dumb ass had cranked the zoom down from 20x...live and learn.
I looked through one a few months ago, they are really nice scopes. The 30mm tube limits vertical adjustment range a little more than a scope with a 34mm tube. Just something to consider.
@Coors Man 264 if you get a rail or mount with the max* MOA built in, you'll likely be able to get the full potential out of it. That will be more important that having an extra 3 MIL of vertical adjustment. I have a 40 MOA rail on my Vudoo, I have 6.7 MIL under the zero stop...which is useless. Not sure if a 60 MOA rail would still zero at 25 or 50 and remain clear. When you get near the limits of adjustment scopes start to get a little cloudy...wouldn't want that for extreme close targets or extreme distance targets. For my use, having a zero at 50 I dial up for 25 yards, and up for everything farther than 50 yards. I can dial to almost 500 yards, never actually tried shooting it that far yet.
*for that scope, to still zero at close distance
*for that scope, to still zero at close distance
Yeah if you’re shooting less than 50yds then yes stay away from Mark5. I actually took my mark5 off my FX crown air rifle cause of parallax and put on a NF NX8 4-32. Works great
Attachments
Vudoo V22 360 20" MTU
Triggertech Special Two-Stage
MPA Comp Chassis
ARCA Atlas Bipod
NF NX8 4-32 w/NF Rings
Triggertech Special Two-Stage
MPA Comp Chassis
ARCA Atlas Bipod
NF NX8 4-32 w/NF Rings
DI Precision Vudoo 360 25” Mullerworks 1/13 twist with V2 EC Tuner
Manners TCS Stock
Tangent Theta 5-25 in Sphur mount with Trijicon SRO on top.
Triggertech Diamond Pro Curve single stage
Manners TCS Stock
Tangent Theta 5-25 in Sphur mount with Trijicon SRO on top.
Triggertech Diamond Pro Curve single stage
Sexy!
Tikka T1X, MDT LSS chassis, Arken EP5 5-25
How’s it shooting?
Vudoo 360
25” muller works 1/13 twist by DI precision
EC V2 tuner
Gen 2 razor
TT diamond
Mdt acc
25” muller works 1/13 twist by DI precision
EC V2 tuner
Gen 2 razor
TT diamond
Mdt acc
Not sure if I shared this yet.
CZ 455 SS action
LW 17hm2 (Factory test barrel)
BScar 2-stage trigger
Rigid Alloy chassis
Area 419 rail
Mueller Target Dot scope
It's tipped over thousands of gophers. The one Eley group I shot during site in was seriously small. See attached
CZ 455 SS action
LW 17hm2 (Factory test barrel)
BScar 2-stage trigger
Rigid Alloy chassis
Area 419 rail
Mueller Target Dot scope
It's tipped over thousands of gophers. The one Eley group I shot during site in was seriously small. See attached
Attachments
Curtis Valor QC
DI Precision 25” mullerworks 13tw EC V2
Gloss high plains TCS
Triggertech diamond flat
G3 Razor in an ARC m brace
DI Precision 25” mullerworks 13tw EC V2
Gloss high plains TCS
Triggertech diamond flat
G3 Razor in an ARC m brace
I always wonder that too, but never ask. I don't know what's wrong with 'em, but I bet it's hard to pronounce.
With my above avg IQ, I would say the Curtis action has a 22LR conversion, and in it's previous life was a 6mm of sorts. And the stock was used for that combo too.
Unless the usage is for double papered blunts, just in case shooting gets stressful, but I know nothing about that shit.
I’ve seen plenty of pictures of Vudoo and RimX rifles with them on the side too.
I beleve they come with the rifles and folks just bolt them on. My MPA BA came with the match saver but obviousy I never use it. If you look at Biathlon rifles they have five singles that you can use to recover a miss. It's shooter call as they have to be manually loaded (can't grab another mag) which is a huge time penalty. Of course taking the miss and sking on results in a lap on the penalty loop which is 150m per miss.
Always thought I would rule at Biathlon! I'm not the fittest or fastest but... "Leeme get this straight? You're sending ME... INTO THE WOODS... WITH A RIFLE and a buncha folks ahead of me? Yep! Imma finish top 10 nooooo problemo!"
I expected the cartridge holder to come with my Vudoo in MPA BA Comp chassis, but it wasn't in the box when the rifle was delivered...I feel so left out.I beleve they come with the rifles and folks just bolt them on. My MPA BA came with the match saver but obviousy I never use it. If you look at Biathlon rifles they have five singles that you can use to recover a miss. It's shooter call as they have to be manually loaded (can't grab another mag) which is a huge time penalty. Of course taking the miss and sking on results in a lap on the penalty loop which is 150m per miss.
Always thought I would rule at Biathlon! I'm not the fittest or fastest but... "Leeme get this straight? You're sending ME... INTO THE WOODS... WITH A RIFLE and a buncha folks ahead of me? Yep! Imma finish top 10 nooooo problemo!"
Always thought I would rule at Biathlon! I'm not the fittest or fastest but... "Leeme get this straight? You're sending ME... INTO THE WOODS... WITH A RIFLE and a buncha folks ahead of me? Yep! Imma finish top 10 nooooo problemo!"
I volunteer a bit for the local biathlon club. It is an absolutely awesome experience. Most memorable was when a coach-mom said, "Eighteen ten year olds with rifles, what could go wrong?".
Last edited:
You can have mine! I'm serious... I'll send it to you if ya want it! Assuming I can find it.I expected the cartridge holder to come with my Vudoo in MPA BA Comp chassis, but it wasn't in the box when the rifle was delivered...I feel so left out.
I'll survive without it; I have 5 ten round mags and a Kydex mag holder for my belt. I just won't look as kewl without the centerfire cartridge holder on the side of my Vudoo.
Some people put tools in them, like a screwdriver to pry out a stuck case.
Mike
Mike
Hands off the barrel. Shoulders over knees, over toes. Square to the rifle/prop.
Similar threads
