Rifle Scopes S&B windage turret problems...

[OH58DViper]

Was resetting the zero on a new 3-20 and when I loosened the screws and moved windage turret the clicks went away and the rotation was smooth. No more tactical clicks when tightened back down. Anyone ever had this issue before? I'm going to call MHSA as soon as they open and see what they say. Just seeing if anyone had ever had this problem.

Thanks

 

[EXTREMEPREJUDICE]

I've found that the MTC turrets are one of the easiest turrets to zero but you only loosen the two adjustment screws. The third screw holds the turret on and is not to be loosened, hope that is not what happened?

 

[digrazir]

There most certainly should still be clicks when adjusting the MTC turret after loosening the two Allen screws on the turret. You don't want to mess with the flat head screw..Ray

 

[OH58DViper]

Yeah never touched the third screw it's got a rubber stopper on it. I just loosened and attempted to do it again and it worked....might have a gremlin I there but it works now.

 

[lash]

It's obvious that you got the much sought after Gremlin Edition.

Glad you got it worked out.