Is anyone running a Vortex Razor HD 5-20X50 on a Sako TRG-22 and if so what rings or mount are you using? I would like to go as low as possible with room for caps and thanks.
Rifle Scopes Sako TRG-22 and Vortex Razor HD Mounts Question
- Thread starter Flatland308
- Start date
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
I'm using Seekins low rings. Just enough room for the caps.
Not the best picture, but I there is just a small amount of clearance. Any lower and they wouldn't fit.
I'm using Seekins low rings. Just enough room for the caps.
Not the best picture, but I there is just a small amount of clearance. Any lower and they wouldn't fit.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
Looks sharp and just the clearance that I am looking for.
Looks sharp and just the clearance that I am looking for.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
Spuhr 35mm mount? Nice, any idea when they will be available?
Spuhr 35mm mount? Nice, any idea when they will be available?
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
A friend of mine has 35/24's from ARC on his TRG42 that has 30MOA built into it.
A friend of mine has 35/24's from ARC on his TRG42 that has 30MOA built into it.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
Seekins.95" rings on factory base. Does one really need a canted base when running a razor on these types of rigs? I think I have 16ish mils till I am bottomed out.
Seekins.95" rings on factory base. Does one really need a canted base when running a razor on these types of rigs? I think I have 16ish mils till I am bottomed out.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Flatland308</div><div class="ubbcode-body">Spuhr 35mm mount? Nice, any idea when they will be available? </div></div>
Dont think it is going to happen
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Flatland308</div><div class="ubbcode-body">Spuhr 35mm mount? Nice, any idea when they will be available? </div></div>
Dont think it is going to happen
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
skog, that is a great looking setup and thanks for the pic! Chiller, I agree as I have found no information to support a 35mm model whatsoever.
skog, that is a great looking setup and thanks for the pic! Chiller, I agree as I have found no information to support a 35mm model whatsoever.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
I decided to go with a Near 25moa base that I found here on the Hide and the Vortex 35mm low rings from Liberty Optics. I called Near and they said there should be no problem with clearance all the way down to .88 so hopefully I am good to go.
I decided to go with a Near 25moa base that I found here on the Hide and the Vortex 35mm low rings from Liberty Optics. I called Near and they said there should be no problem with clearance all the way down to .88 so hopefully I am good to go.
Re: Sako TRG-22 and Vortex Razor HD Mounts Question
It is going to happend Chiller.
they are in producktion as we speak!
both in 1,18" height and 1,46" height.
Håkan
It is going to happend Chiller.
they are in producktion as we speak!
both in 1,18" height and 1,46" height.
Håkan
Similar threads
