• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

SAKO TRG22 barrel contour?

Distance shooter

Full Member
Full Member
Minuteman
Oct 13, 2009
127
0
65
California
I have used the search engine but have not had much luck. I want to make a switch barrel out of my TRG22 , but I do not know what contour barrel will fit the action. I have measured my barrel and it is smaller in diameter than any of the ones listed on the Kreiger contour web page. If anyone has any info on what contour would fit, I would greatly appreciate it.
Thanks
 
Re: SAKO TRG22 barrel contour?

If you are using the original Sako TRG bipod the barrel can´t be thicker than 24.8mm over the bipods-area, otherwise it will not clear the bipod.

If you are not using the TRG bipod and if I recall correctly the MTU countor will fit if you take off the "side mounted" swivel attachment which is connected in the chassi under the barrel.
 
Re: SAKO TRG22 barrel contour?

Sakos use a palma-like contour. I think a medium palma is a pretty close match. As for barrel channel, youve got all the room in the world. Just be sure you can clear the bipod, as mentioned above.
 
Re: SAKO TRG22 barrel contour?

Thanks for the help. I was concerned about the shank diameter of 1.250 on the kreiger site because I measured my Sako barrel and it was 1.158 at the action, but there is a lot of room in the channel. Thanks again.

DS
 
Re: SAKO TRG22 barrel contour?

Might want to ask forwardeyes as he has a light varmint contour on his TRG rebarreled to a .260 and he has notched his barrel to work with the TRG bipod. It has worked well so far and the gun shoots well.
 
Re: SAKO TRG22 barrel contour?

This is how my barrel looked like to be able to use the TRG bipod:
IMG_0744.jpg
 
Re: SAKO TRG22 barrel contour?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lill-rambo</div><div class="ubbcode-body">This is how my barrel looked like to be able to use the TRG bipod:
IMG_0744.jpg
</div></div>

Is that the wide or newer narrower bipod?