I helped a buddy of mine put a Mcgowen prefit barrel on his Savage and after we adjusted headspace and tightened the barrel nut down the lettering was top dead center. Is that right ?
Gunsmithing Savage prefit barrel question
- Thread starter CSiebert
- Start date
Re: Savage prefit barrel question
it reay depends on the setup , some actions may have the lettering upside down on the wrong side or the bottom.
Depends on what your using for the "GO" gage , I generaly use a FL resized case to set the headspace this way the camber if setup so that I can FL size my brass and its getting worked very little
<span style="font-size: 11pt"><span style="font-weight: bold">BUT</span></span>
I have done this and factory ammo would not chamber so thats somthing to think about.
I have also heard of guys using whatever ammo they want to shoot as the "GO" gage , it just seems like a bad idea to use a live round for that job.
it reay depends on the setup , some actions may have the lettering upside down on the wrong side or the bottom.
Depends on what your using for the "GO" gage , I generaly use a FL resized case to set the headspace this way the camber if setup so that I can FL size my brass and its getting worked very little
<span style="font-size: 11pt"><span style="font-weight: bold">BUT</span></span>
I have done this and factory ammo would not chamber so thats somthing to think about.
I have also heard of guys using whatever ammo they want to shoot as the "GO" gage , it just seems like a bad idea to use a live round for that job.
Re: Savage prefit barrel question
yeah, most letter after the barrel is installed so its indexed properly. set the headspace and shoot
yeah, most letter after the barrel is installed so its indexed properly. set the headspace and shoot
Similar threads
