So I purchased some once fired .223 lapua brass from a fellow hide member. I resized it all with my redding type s die.
When I went to seat a 80gr berger in the case, there was no resistance and the projectile was not held in the neck.
I measured the outside diameter and compared it to some new brass and the necks measured the same on the outside. What's going on?
When I went to seat a 80gr berger in the case, there was no resistance and the projectile was not held in the neck.
I measured the outside diameter and compared it to some new brass and the necks measured the same on the outside. What's going on?