Rifle Scopes Setting Up An EREK Knob

[JBW3]

Re: Setting Up An EREK Knob

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">According to other users here and USO, the 34mm only increases the outer OD of the tube while keeping the same ID of the tube as the 30mm, so it should offer the same amount of erector tube travel as the 30mm. </div></div>

Actually the 34 and 35mm tubes have the same ID, the 30mm is smaller. So you do get more travel out of the 34 and 35mm tubes over the 30mm.
John III

 

[pklin1297]

Re: Setting Up An EREK Knob

Thanks John for correcting me!

 

[JBW3]

Re: Setting Up An EREK Knob

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SoCalPete</div><div class="ubbcode-body">Thanks John for correcting me!

</div></div>

No problem, I just want to make sure this thread doesn't cause any more headaches than it already has.
John III

 

[CSTactical]

Re: Setting Up An EREK Knob

I see I was beat to the reply. Thank you John.

Mike @ CST

 

[exedotbat]

Re: Setting Up An EREK Knob

tag