• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Short barrel 308 guys.

jerseymike

NJ LEO
Full Member
Minuteman
Jul 24, 2007
1,452
3
Central, NJ
Any of you guys with 18-20 inch barrels, getting over 2600 fps with 175s or 178s????

Right now im pushing 178s with 44gr of varget at 2525, slight flat primer. Thinking if i should go up another half to one grain.
 
Re: Short barrel 308 guys.

Fastest I ever got with 175's/178's was around 2580. With 43.8 grains of Varget. It was through a Brux 4 groove that was crowned at 17.5"


I did get 2620's from a 2010 Lot of M118LR, very accurate too.
 
Re: Short barrel 308 guys.

43.0g varget 175 smk is getting me 2470ish at 1000ft 75F out of a 16 inch DTA barrel.

Same load gets 2520 out of a 21 inch Lilja barrel.
 
Re: Short barrel 308 guys.

What action?
What chamber?
Who made barrel and twist rate?

Had a set back Rem 700 PSS barrel, 20" long with custom chamber (very close to a 95 Palma IIRC) that would run 175 SMKs at 2620. What velocity is the rifle printing best groups at 300 yards or farther? Velocity is fine, accuracy is final.
 
Re: Short barrel 308 guys.

Trued rem with ptg bolt, 308 match chamber, barrel is 18.5 4 groove 10 twist krieger with sf brake.

Havent shot groups with it other than 100 yards but stacks bullets on steel at 4-550 yds.
 
Re: Short barrel 308 guys.

I went from a 26" TRG22 down to a 20" TRG22. I really wanted to develop a load for the 178gr BTHP to achieve good accuracy and be over 2600fps. At or above 2600 fps I have fair only accuracy and a sticky bolt. I dropped down about half a grain of Varget to 44.3 grs, and have consistant half MOA or less, and 2582 average FPS, and no pressure signs.

I tried PP2000mr, and got slightly better velocity, but at the price of random pressure signs and fair only accuracy.

2582 fps will just have to do.....