Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
The site has been updated!
If you notice any issues, please let us know below!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: themayor</div><div class="ubbcode-body">Need to solder a gass block on my ar tips on what to do ? </div></div> I'll give you a tip, dont do it.
Many CMP AR's have had the FSB attached with green loctite.
The barrel really does not get that hot up there to worry about the loctite breaking down from heat.
Compass lake barrels have larger gas block journals than most factory barrels.
They either heat up the gas block and let it shrink to the barrel, or they use loctite sleeve retaining compound.
The last one of those gas blocks a had to remove was installed with loctite.
Get yourself some loctite 620 or 640, put about 8-10 drops on the barrel, spread it around and slide the gas block on the barrel.
Align it and let it cure.