Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
The site has been updated!
If you notice any issues, please let us know below!
Would you by chance have a caliper to measure the actual barrel channel. I’d like to see if my Christiansen Arms Ridgeline will drop in without a lot of fitting.
Would you by chance have a caliper to measure the actual barrel channel. I’d like to see if my Christiansen Arms Ridgeline will drop in without a lot of fitting.
It says that the stock will take up to an M24 profile barrel, which is just about the stoutest barrel profile next to straight cylinder that there is. See dimensions of the M24 on chart below. Last one.
Would you by chance have a caliper to measure the actual barrel channel. I’d like to see if my Christiansen Arms Ridgeline will drop in without a lot of fitting.
Add a little +/- in the measurements as I was trying to hold the stock, caliper while not getting a reflection on it from the overhead light, and take the picture. Tape measure is at the front of the lug pocket so measuring from front of your lug may be slightly different as well but should give you a general feel of fit.
It says that the stock will take up to an M24 profile barrel, which is just about the stoutest barrel profile next to straight cylinder that there is. See dimensions of the M24 on chart below. Last one.
Thank you for attempting to help. The stock can be cut up to an M24 but what is cut is specific to the order placed at Manners. This stock is currently cut to a Bartlein #13. It is not hard to cut out for thicker barrels at all though. Plenty of folks do it with dowel rods and sandpaper. Or you can send it back to Manners and they'll do it in weeks rather than wait 10+ mo for a new stock
Thank you for attempting to help. The stock can be cut up to an M24 but what is cut is specific to the order placed at Manners. This stock is currently cut to a Bartlein #13. It is not hard to cut out for thicker barrels at all though. Plenty of folks do it with dowel rods and sandpaper. Or you can send it back to Manners and they'll do it in weeks rather than wait 10+ mo for a new stock.
Thank you for attempting to help. The stock can be cut up to an M24 but what is cut is specific to the order placed at Manners. This stock is currently cut to a Bartlein #13. It is not hard to cut out for thicker barrels at all though. Plenty of folks do it with dowel rods and sandpaper. Or you can send it back to Manners and they'll do it in weeks rather than wait 10+ mo for a new stock
Thanks, I think my barreled action should drop right in. I’ll check when I get home……fitting actions and barrels to stocks never goes well for me, I have “0” patience when it comes to fine detailed work.