Sprockets
- Thread starter bdw0469
- Start date
Re: Sprockets
I'd say that you'd have to be more specific.
A) what style of chain
B) what pitch of chain
C) what hub type
Among others. Here is a link describing it/them in more detail: Sprocket info here (pdf)
I'd say that you'd have to be more specific.
A) what style of chain
B) what pitch of chain
C) what hub type
Among others. Here is a link describing it/them in more detail: Sprocket info here (pdf)
Re: Sprockets
I am making the mount for the sprocket. #35 chain or bigger, its not going to be under a lot of stress. The important dimensions are whats listed. I don't care if its a motorcycle sprocket or go kart sprocket, I just need it to be at least 12 inches outside diameter.
I am making the mount for the sprocket. #35 chain or bigger, its not going to be under a lot of stress. The important dimensions are whats listed. I don't care if its a motorcycle sprocket or go kart sprocket, I just need it to be at least 12 inches outside diameter.
Re: Sprockets
What your doing with it would allow a better conceptual view on exactly what you need. You only need something larger than a bicycle chain, motorcycle chain too big/small, Timing chain too wide...
Custom and OEM sprockets are found, at least for motorcycles here
http://rebelgears.com/
http://www.jtsprockets.com/products
http://www.sidewindersprockets.com/
What your doing with it would allow a better conceptual view on exactly what you need. You only need something larger than a bicycle chain, motorcycle chain too big/small, Timing chain too wide...
Custom and OEM sprockets are found, at least for motorcycles here
http://rebelgears.com/
http://www.jtsprockets.com/products
http://www.sidewindersprockets.com/
Re: Sprockets
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/tdq5a1KzsJ0&NR=1"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/tdq5a1KzsJ0&NR=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/QHZR9SA5pOg"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/QHZR9SA5pOg" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/tdq5a1KzsJ0&NR=1"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/tdq5a1KzsJ0&NR=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/QHZR9SA5pOg"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/QHZR9SA5pOg" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>
Re: Sprockets
I can't say much about the project. The problem is most manufacturers do not give an outside diameter, only tooth count. With most its application specific and I would be hard pressed to go out and measure the sprockets on every motorcycle I find. this was a shot in the dark, figured maybe someone dealt with them on a daily basis. I have found some companies that can make it, but for a single piece the price a lot more than I care to spend on a sprocket. Grainger does list an outside diameter but the ones that are big enough have a hub as part of the assembly. I am just looking for a sprocket that is hubless. The center hole will be cut out to 9-10 inches in diameter. A motorcycle sprocket would be great. They are light and I will be able to get a smaller sprocket to match the chain.
I can't say much about the project. The problem is most manufacturers do not give an outside diameter, only tooth count. With most its application specific and I would be hard pressed to go out and measure the sprockets on every motorcycle I find. this was a shot in the dark, figured maybe someone dealt with them on a daily basis. I have found some companies that can make it, but for a single piece the price a lot more than I care to spend on a sprocket. Grainger does list an outside diameter but the ones that are big enough have a hub as part of the assembly. I am just looking for a sprocket that is hubless. The center hole will be cut out to 9-10 inches in diameter. A motorcycle sprocket would be great. They are light and I will be able to get a smaller sprocket to match the chain.
Re: Sprockets
take a ride over to a motor cycle shop and ask them to sell you their biggest sprocket. Seems easy as hell to me, that's how I have built many racing lawn mowers.
take a ride over to a motor cycle shop and ask them to sell you their biggest sprocket. Seems easy as hell to me, that's how I have built many racing lawn mowers.
