Steps to refine a badger M2008 bolt lift
- Thread starter K_4c
- Start date
The first gen firing pin springs were getting light primer strikes, Badger went with a heavier spring to remedy the issue and in turn this makes the bolt lift heavier. You can play around with the firing pin tension, as well as lapping the cam on the bolt that cocks the firing pin.
here is a pic of a Rem bolt, Badger uses the same design. Polish this area with a small polishing wheel on a dremel, as well as the area on the firing pin in the bolt shroud that makes contact.
here is a pic of a Rem bolt, Badger uses the same design. Polish this area with a small polishing wheel on a dremel, as well as the area on the firing pin in the bolt shroud that makes contact.
much appreciated CK.
Contact Where's Waldo here on the hide, he polished the co king ramp and put a Tubb's Firing Assembly in and his is the slickest M2008 ever!! He can show exact pics and steps.
