I don't want to seam like a newbe but I guess I am when it comes to bolt guns. I just got a new Remy 700 SPS and I put a HS precision police sniper stock on it last night and I was wondering if a Badger Ord. bottom metal with mag will drop right in or do I need to make modification to stock ? Thanks for any info.
stock question
- Thread starter SuddenDeath
- Start date
Re: stock question
My experience:
The HS Precision stock is inlet for HS DBM. Most others will need inletting.
My experience:
The HS Precision stock is inlet for HS DBM. Most others will need inletting.
Re: stock question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GardDog223</div><div class="ubbcode-body">My experience:
The HS Precision stock is inlet for HS DBM. Most others will need inletting.
</div></div>
sorry to be so dumb but can you explain a little more for me, these bolt rifles are a foren language for me.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GardDog223</div><div class="ubbcode-body">My experience:
The HS Precision stock is inlet for HS DBM. Most others will need inletting.
</div></div>
sorry to be so dumb but can you explain a little more for me, these bolt rifles are a foren language for me.
Re: stock question
No problem. The HS Precision stock is inlet (cut) to fit the HS Precision bottom metal. Badger, CDI, HS, all have a slightly different footprint than each other. I put HS bottom metal on my 700P stock, with no modification... drop in fit. When I looked at putting something else on it, in order to use AI magazines. I found that a couple of the bottom metal companies can give you a trace outline of their bottom metal, so you can look at your current inlet and see how much needs to be changed to fit their product.
No problem. The HS Precision stock is inlet (cut) to fit the HS Precision bottom metal. Badger, CDI, HS, all have a slightly different footprint than each other. I put HS bottom metal on my 700P stock, with no modification... drop in fit. When I looked at putting something else on it, in order to use AI magazines. I found that a couple of the bottom metal companies can give you a trace outline of their bottom metal, so you can look at your current inlet and see how much needs to be changed to fit their product.
Re: stock question
Thank you for the info. If I still decide to go with the Badger it may not be that big of a deal for me, because I am a tool and die machinest. I just did not have the 411 on that stuff, thanks again
Thank you for the info. If I still decide to go with the Badger it may not be that big of a deal for me, because I am a tool and die machinest. I just did not have the 411 on that stuff, thanks again
