Just finishing up a build with a Faxon barrel and would like to get the gas block adjusted somewhat before I start load development so I don't damage my brass. From what I've been reading, it'll probably be way over gassed. Has anyone been able to adjust the gas block on these with the bleed off feature on the gas block or did you have to use the gas limiting settings? Just trying to see what others have found works best. Wondering if I should be looking at heavier buffer if I can't get the bleed off to control enough gas. I'll be using a standard aero carbine tube for large frames, and standard BCG. May want to run the rifle with a can in the future also.